Add id-gpios, vbus-gpios, vbus-supply and pinctrl properties for usb-b-connector Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx> --- v2 changes: 1. describe more clear for vbus-gpios and vbus-supply suggested by Hans --- .../devicetree/bindings/connector/usb-connector.txt | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/Documentation/devicetree/bindings/connector/usb-connector.txt b/Documentation/devicetree/bindings/connector/usb-connector.txt index a9a2f2fc44f2..1c4ed6c9afa8 100644 --- a/Documentation/devicetree/bindings/connector/usb-connector.txt +++ b/Documentation/devicetree/bindings/connector/usb-connector.txt @@ -17,6 +17,15 @@ Optional properties: - self-powered: Set this property if the usb device that has its own power source. +Optional properties for usb-b-connector: +- id-gpios: gpio for USB ID pin. +- vbus-gpios: gpio for USB VBUS pin, used to detect presence of VBUS 5V. + see gpio/gpio.txt. +- vbus-supply: a phandle to the regulator for USB VBUS if needed. +- pinctrl-names : a pinctrl state named "default" is optional +- pinctrl-0 : pin control group + see pinctrl/pinctrl-bindings.txt + Optional properties for usb-c-connector: - power-role: should be one of "source", "sink" or "dual"(DRP) if typec connector has power support. -- 2.20.1
