The Allwinner A10 CMOS Sensor Interface is a camera capture interface also used in later (A10s, A13, A20, R8 and GR8) SoCs. On some SoCs, like the A10, there's multiple instances of that controller, with one instance supporting more channels and having an ISP. Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxx> --- Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml | 115 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 115 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml diff --git a/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml new file mode 100644 index 000000000000..30c5dc1406cf --- /dev/null +++ b/Documentation/devicetree/bindings/media/allwinner,sun4i-a10-csi.yaml @@ -0,0 +1,115 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/allwinner,sun4i-a10-csi.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A10 CMOS Sensor Interface (CSI) Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@xxxxxxxx> + - Maxime Ripard <maxime.ripard@xxxxxxxxxxx> + +properties: + compatible: + oneOf: + - items: + - enum: + - allwinner,sun7i-a20-csi0 + - const: allwinner,sun4i-a10-csi0 + + - items: + - const: allwinner,sun4i-a10-csi0 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: The CSI interface clock + - description: The CSI module clock + - description: The CSI ISP clock + - description: The CSI DRAM clock + + clock-names: + items: + - const: bus + - const: mod + - const: isp + - const: ram + + resets: + description: The reset line driver this IP + maxItems: 1 + + pinctrl-0: + minItems: 1 + + pinctrl-names: + const: default + + port: + additionalProperties: false + + properties: + endpoint: + properties: + bus-width: + const: 8 + description: + Number of data lines actively used. + + data-active: + description: Polarity of the data lines, 0 for active low, + 1 for active high. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [0, 1] + + hsync-active: + description: Active state of the HSYNC signal, 0 for + active low, 1 for active high. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [0, 1] + + pclk-sample: + description: Sample data on the rising (1) or falling (0) + edge of the pixel clock signal + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [0, 1] + + remote-endpoint: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: Phandle to an endpoint subnode of a remote + device node. + + vsync-active: + description: Active state of the VSYNC signal, 0 for + active low, 1 for active high. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - enum: [0, 1] + + required: + - bus-width + - data-active + - hsync-active + - pclk-sample + - remote-endpoint + - vsync-active + + required: + - endpoint + +required: + - compatible + - reg + - interrupts + - clocks + +additionalProperties: false -- git-series 0.9.1
