On Thu, Mar 14, 2019 at 06:27:20AM +0000, Anson Huang wrote: > i.MX7ULP has TPM(Low Power Timer/Pulse Width Modulation Module) > inside, add TPM PWM driver support. > > Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx> > --- > Changes since V2: > - Add "IMX_" as prefix to macro define as TPM is already used; > - Use macro define for channel registers address instead of calculation in everywhere. > - Add limitations statement in copyright. > --- > drivers/pwm/Kconfig | 10 ++ > drivers/pwm/Makefile | 1 + > drivers/pwm/pwm-imx-tpm.c | 343 ++++++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 354 insertions(+) > create mode 100644 drivers/pwm/pwm-imx-tpm.c > > diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig > index a8f47df..c1cbb43 100644 > --- a/drivers/pwm/Kconfig > +++ b/drivers/pwm/Kconfig > @@ -201,6 +201,16 @@ config PWM_IMX > To compile this driver as a module, choose M here: the module > will be called pwm-imx. > > +config PWM_IMX_TPM > + tristate "i.MX TPM PWM support" > + depends on ARCH_MXC > + help > + Generic PWM framework driver for i.MX7ULP TPM module, TPM's full > + name is Low Power Timer/Pulse Width Modulation Module. > + > + To compile this driver as a module, choose M here: the module > + will be called pwm-imx-tpm. > + > config PWM_JZ4740 > tristate "Ingenic JZ47xx PWM support" > depends on MACH_INGENIC > diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile > index 9c676a0..64e036c 100644 > --- a/drivers/pwm/Makefile > +++ b/drivers/pwm/Makefile > @@ -18,6 +18,7 @@ obj-$(CONFIG_PWM_FSL_FTM) += pwm-fsl-ftm.o > obj-$(CONFIG_PWM_HIBVT) += pwm-hibvt.o > obj-$(CONFIG_PWM_IMG) += pwm-img.o > obj-$(CONFIG_PWM_IMX) += pwm-imx.o > +obj-$(CONFIG_PWM_IMX_TPM) += pwm-imx-tpm.o > obj-$(CONFIG_PWM_JZ4740) += pwm-jz4740.o > obj-$(CONFIG_PWM_LP3943) += pwm-lp3943.o > obj-$(CONFIG_PWM_LPC18XX_SCT) += pwm-lpc18xx-sct.o > diff --git a/drivers/pwm/pwm-imx-tpm.c b/drivers/pwm/pwm-imx-tpm.c > new file mode 100644 > index 0000000..cdb29f6 > --- /dev/null > +++ b/drivers/pwm/pwm-imx-tpm.c > @@ -0,0 +1,343 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright 2018-2019 NXP. > + * > + * Limitations: > + * - The TPM counter and period counter are shared between > + * multiple channels, so all channels should use same period > + * settings. > + * - When a channel is disabled, its polarity settings will be > + * saved and its output will be disabled by clearing polarity > + * setting, when channel is enabled, polarity settings will be > + * restored and output will be enabled again. > + * - ONLY when all channels are disabled, then TPM counter will > + * be disabled. I wouldn't list the last two items in this section. These are implementation details that a PWM consumer doesn't need to bother with. These are fine to be noted in a code comment at the appropriate place. Other than that please look at my feedback for the previous series that I just sent out. I think most things still apply to this version. Best regards Uwe -- Pengutronix e.K. | Uwe Kleine-König | Industrial Linux Solutions | http://www.pengutronix.de/ |
