[PATCH AUTOSEL 4.20 28/60] ARM: dts: am335x-evmsk: Fix PHY mode for ethernet

[Sasha Levin <sashal@xxxxxxxxxx>]

From: Peter Ujfalusi <peter.ujfalusi@xxxxxx>

[ Upstream commit 759c962d3c9bb1a60e3b4b780daa66ee6d4be13a ]

The PHY must add both tx and rx delay and not only on the tx clock.
The board uses AR8031_AL1A PHY where the rx delay is enabled by default,
the tx dealy is disabled.

The reason why rgmii-txid worked because the rx delay was not disabled by
the driver so essentially we ended up with rgmii-id PHY mode.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 arch/arm/boot/dts/am335x-evmsk.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts
index 245868f58fe3..583f83b1742d 100644
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -651,13 +651,13 @@
 
 &cpsw_emac0 {
 	phy-handle = <&ethphy0>;
-	phy-mode = "rgmii-txid";
+	phy-mode = "rgmii-id";
 	dual_emac_res_vlan = <1>;
 };
 
 &cpsw_emac1 {
 	phy-handle = <&ethphy1>;
-	phy-mode = "rgmii-txid";
+	phy-mode = "rgmii-id";
 	dual_emac_res_vlan = <2>;
 };
 
-- 
2.19.1