Changes since v2: - split dt-binding and related header to a separate patch - add vendor prefix to i2s-fifo-routing dt-property - add license identifier and copyright notice to sii902x-audio.h - sii902x_get_modes() reorder local variables - put clk_prepare_enable() before clk_get_rate(), according to documentation clk_get_rate() is only valid once the clock is enabled The three already reviewed patches are in front: - drm/bridge: sii902x: add input_bus_flags - drm/bridge: sii902x: Set output mode to HDMI or DVI according to EDID - drm/bridge: sii902x: pixel clock unit is 10kHz instead of 1kHz The previous review round can be found here: https://patchwork.kernel.org/cover/10832351/ Jyri Sarha (5): drm/bridge: sii902x: Set output mode to HDMI or DVI according to EDID drm/bridge: sii902x: pixel clock unit is 10kHz instead of 1kHz dt-bindings: display: sii902x: Remove trailing white space dt-bindings: display: sii902x: Add HDMI audio bindings drm/bridge: sii902x: Implement HDMI audio support Tomi Valkeinen (1): drm/bridge: sii902x: add input_bus_flags .../bindings/display/bridge/sii902x.txt | 36 +- drivers/gpu/drm/bridge/sii902x.c | 472 +++++++++++++++++- include/dt-bindings/sound/sii902x-audio.h | 17 + 3 files changed, 517 insertions(+), 8 deletions(-) create mode 100644 include/dt-bindings/sound/sii902x-audio.h -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
