Hi Sergei, On: 27/03/2014 11:08, Sergei wrote: > Subject: Re: [PATCH v6 05/10] dt-bindings: pci: rcar pcie device tree bindings > > Hello. > > On 27-03-2014 13:26, Phil Edworthy wrote: > > > This patch adds the bindings for the R-Car PCIe driver. The driver > > resides under drivers/pci/host/pcie-rcar.c > > > Signed-off-by: Phil Edworthy <phil.edworthy@xxxxxxxxxxx> > > > v6: > > - Correct DT bindings description for reg and clocks > > > v5: > > - Add PCIe bus clock reference > > - Add additional interrupt bindings > > - Use dma-ranges property to specify inbound memory regions > > Put these under --- tear line, please. > > > --- > > Documentation/devicetree/bindings/pci/rcar-pci.txt | 45 ++++++++++++++++++++++ > > 1 file changed, 45 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/pci/rcar-pci.txt > > > diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/ > Documentation/devicetree/bindings/pci/rcar-pci.txt > > new file mode 100644 > > index 0000000..a97ebe6 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt > > @@ -0,0 +1,45 @@ > > +* Renesas RCar PCIe interface > > + > > +Required properties: > > +- compatible: should contain one of the following > > + "renesas,pcie-r8a7779", "renesas,pcie-r8a7790", "renesas,pcie-r8a7791" > > +- reg: base address and length of the pcie controller registers. > > +- #address-cells: set to <3> > > +- #size-cells: set to <2> > > +- device_type: set to "pci" > > +- ranges: ranges for the PCI memory and I/O regions. > > +- dma-ranges: ranges for the inbound memory regions. > > +- interrupts: two interrupt sources for MSI interrupts, followed by interrupt > > + source for hardware related interrupts (e.g. link speed change). > > +- #interrupt-cells: set to <1> > > +- interrupt-map-mask and interrupt-map: standard PCI properties > > + to define the mapping of the PCIe interface to interrupt > > + numbers. > > +- clocks: from common clock binding: phandles to PCIe controller and PCIe bus > > + clocks. > > I told it's not only phandles (e.g. &mstp3_clks) but the clock specifiers. Ah, yes you did. Thanks Phil -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
