Hi Matthias,
A gentle ping for all the smi part here.
>From Joerg, your review is expected before he apply.
Thanks in advance.
On Sun, 2019-02-17 at 17:04 +0800, Yong Wu wrote:
> In some SoCs like mt8183, SMI add GALS(Global Async Local Sync) module
> which can help synchronize for the modules in different clock frequency.
> It can be seen as a "asynchronous fifo". This is a example diagram:
>
> M4U
> |
> ----------
> | |
> gals0-rx gals1-rx
> | |
> | |
> gals0-tx gals1-tx
> | |
> ------------
> SMI Common
> ------------
> |
> +-----+--------+-----+- ...
> | | | |
> | gals-rx gals-rx |
> | | | |
> | | | |
> | gals-tx gals-tx |
> | | | |
> larb1 larb2 larb3 larb4
>
> GALS only help transfer the command/data while it doesn't have the
> configuring register, thus it has the special "smi" clock and doesn't
> have the "apb" clock. From the diagram above, we add "gals0" and
> "gals1" clocks for smi-common and add a "gals" clock for smi-larb.
>
> This patch adds gals clock supporting in the SMI. Note that some larbs
> may still don't have the "gals" clock like larb1 and larb4 above.
>
> This is also a preparing patch for mt8183 which has GALS.
>
> CC: Matthias Brugger <matthias.bgg@xxxxxxxxx>
> Signed-off-by: Yong Wu <yong.wu@xxxxxxxxxxxx>
> Reviewed-by: Evan Green <evgreen@xxxxxxxxxxxx>
> ---
> drivers/memory/mtk-smi.c | 36 ++++++++++++++++++++++++++++++++++++
> 1 file changed, 36 insertions(+)
>
> diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c
> index 8a2f968..91634d7 100644
> --- a/drivers/memory/mtk-smi.c
> +++ b/drivers/memory/mtk-smi.c
> @@ -56,6 +56,7 @@ enum mtk_smi_gen {
>
> struct mtk_smi_common_plat {
> enum mtk_smi_gen gen;
> + bool has_gals;
> };
>
> struct mtk_smi_larb_gen {
> @@ -63,11 +64,13 @@ struct mtk_smi_larb_gen {
> int port_in_larb[MTK_LARB_NR_MAX + 1];
> void (*config_port)(struct device *);
> unsigned int larb_direct_to_common_mask;
> + bool has_gals;
> };
>
> struct mtk_smi {
> struct device *dev;
> struct clk *clk_apb, *clk_smi;
> + struct clk *clk_gals0, *clk_gals1;
> struct clk *clk_async; /*only needed by mt2701*/
> void __iomem *smi_ao_base;
>
> @@ -99,8 +102,20 @@ static int mtk_smi_enable(const struct mtk_smi *smi)
> if (ret)
> goto err_disable_apb;
>
> + ret = clk_prepare_enable(smi->clk_gals0);
> + if (ret)
> + goto err_disable_smi;
> +
> + ret = clk_prepare_enable(smi->clk_gals1);
> + if (ret)
> + goto err_disable_gals0;
> +
> return 0;
>
> +err_disable_gals0:
> + clk_disable_unprepare(smi->clk_gals0);
> +err_disable_smi:
> + clk_disable_unprepare(smi->clk_smi);
> err_disable_apb:
> clk_disable_unprepare(smi->clk_apb);
> err_put_pm:
> @@ -110,6 +125,8 @@ static int mtk_smi_enable(const struct mtk_smi *smi)
>
> static void mtk_smi_disable(const struct mtk_smi *smi)
> {
> + clk_disable_unprepare(smi->clk_gals1);
> + clk_disable_unprepare(smi->clk_gals0);
> clk_disable_unprepare(smi->clk_smi);
> clk_disable_unprepare(smi->clk_apb);
> pm_runtime_put_sync(smi->dev);
> @@ -310,6 +327,15 @@ static int mtk_smi_larb_probe(struct platform_device *pdev)
> larb->smi.clk_smi = devm_clk_get(dev, "smi");
> if (IS_ERR(larb->smi.clk_smi))
> return PTR_ERR(larb->smi.clk_smi);
> +
> + if (larb->larb_gen->has_gals) {
> + /* The larbs may still haven't gals even if the SoC support.*/
> + larb->smi.clk_gals0 = devm_clk_get(dev, "gals");
> + if (PTR_ERR(larb->smi.clk_gals0) == -ENOENT)
> + larb->smi.clk_gals0 = NULL;
> + else if (IS_ERR(larb->smi.clk_gals0))
> + return PTR_ERR(larb->smi.clk_gals0);
> + }
> larb->smi.dev = dev;
>
> if (larb->larb_gen->need_larbid) {
> @@ -402,6 +428,16 @@ static int mtk_smi_common_probe(struct platform_device *pdev)
> if (IS_ERR(common->clk_smi))
> return PTR_ERR(common->clk_smi);
>
> + if (common->plat->has_gals) {
> + common->clk_gals0 = devm_clk_get(dev, "gals0");
> + if (IS_ERR(common->clk_gals0))
> + return PTR_ERR(common->clk_gals0);
> +
> + common->clk_gals1 = devm_clk_get(dev, "gals1");
> + if (IS_ERR(common->clk_gals1))
> + return PTR_ERR(common->clk_gals1);
> + }
> +
> /*
> * for mtk smi gen 1, we need to get the ao(always on) base to config
> * m4u port, and we need to enable the aync clock for transform the smi
