[PATCH 3/4] OPP: Update the bandwidth on OPP frequency changes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



If the OPP bandwidth values are populated, we want to switch also the
interconnect bandwidth in addition to frequency and voltage.

Signed-off-by: Georgi Djakov <georgi.djakov@xxxxxxxxxx>
---
 drivers/opp/core.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/opp/core.c b/drivers/opp/core.c
index 4b019cecaa07..99e7c4cf6c34 100644
--- a/drivers/opp/core.c
+++ b/drivers/opp/core.c
@@ -781,6 +781,10 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq)
 		ret = _generic_set_opp_clk_only(dev, clk, old_freq, freq);
 	}
 
+	if (!ret && !IS_ERR_OR_NULL(opp_table->path) && opp->bandwidth)
+		icc_set_bw(opp_table->path, opp->bandwidth->avg,
+			   opp->bandwidth->peak);
+
 	/* Scaling down? Configure required OPPs after frequency */
 	if (!ret && freq < old_freq) {
 		ret = _set_required_opps(dev, opp_table, opp);



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux