Hi Rob,
On Tue, 2019-03-12 at 21:25 +0800, Rob Herring wrote:
> On Wed, Feb 27, 2019 at 03:23:09PM +0800, Stanley Chu wrote:
> > Add UFS M-PHY node document for MediaTek SoC chips.
> >
> > Signed-off-by: Stanley Chu <stanley.chu@xxxxxxxxxxxx>
> > ---
> > .../devicetree/bindings/phy/phy-mtk-ufs.txt | 35 +++++++++++++++++++
> > 1 file changed, 35 insertions(+)
> > create mode 100644 Documentation/devicetree/bindings/phy/phy-mtk-ufs.txt
> >
> > diff --git a/Documentation/devicetree/bindings/phy/phy-mtk-ufs.txt b/Documentation/devicetree/bindings/phy/phy-mtk-ufs.txt
> > new file mode 100644
> > index 000000000000..5fc22c7fe0bc
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/phy/phy-mtk-ufs.txt
> > @@ -0,0 +1,35 @@
> > +MediaTek Universal Flash Storage (UFS) M-PHY binding
> > +--------------------------------------------------------
> > +
> > +UFS M-PHY nodes are defined to describe on-chip UFS M-PHY hardware macro.
> > +Each UFS M-PHY node should have its own node.
> > +
> > +To bind UFS M-PHY with UFS host controller, the controller node should
> > +contain a phandle reference to UFS M-PHY node.
> > +
> > +Required properties for UFS M-PHY nodes:
> > +- compatible : Compatible list, contains the following controller:
> > + "mediatek,ufs-mphy"
>
> Needs a more specific compatible string.
Will add it.
>
> > +- reg : Address and length of the UFS M-PHY register set.
> > +- #phy-cells : This property shall be set to 0
> > +- clocks : List of phandle and clock specifier pairs.
> > +- clock-names : List of clock input name strings sorted in the same
> > + order as the clocks property. "unipro-clk" and
> > + "mp-clk" are mandatory.
> > +
> > +Example:
> > +
> > + ufs_mphy: ufs_mphy@11fa0000 {
>
> phy@...
Will fix it.
>
> > + compatible = "mediatek,ufs-mphy";
> > + reg = <0 0x11fa0000 0 0xc000>;
> > + #phy-cells = <0>;
> > +
> > + clocks = <&infracfg_ao INFRACFG_AO_UNIPRO_SCK_CG>,
> > + <&infracfg_ao INFRACFG_AO_UFS_MP_SAP_BCLK_CG>;
> > + clock-names = "unipro-clk", "mp-clk";
> > + };
> > +
> > + ufshci:ufshci@11270000 {
> > + ...
> > + phys = <&ufs_mphy>;
> > + };
> > --
> > 2.18.0
> >
Thanks,
Stanley.
