On Mon, Mar 11, 2019 at 6:49 PM Patrick Venture <venture@xxxxxxxxxx> wrote:
>
> On Mon, Mar 11, 2019 at 3:20 PM Rob Herring <robh@xxxxxxxxxx> wrote:
> >
> > On Mon, Mar 04, 2019 at 10:55:36AM -0800, Patrick Venture wrote:
> > > Document the ast2400, ast2500 PCI-to-AHB bridge control driver bindings.
> > >
> > > Signed-off-by: Patrick Venture <venture@xxxxxxxxxx>
> > > ---
> > > Changes for v6:
> > > - None
> > > Changes for v5:
> > > - None
> > > Changes for v4:
> > > - None
> > > Changes for v3:
> > > - None
> > > Changes for v2:
> > > - Added comment about syscon required parameter.
> > > ---
> > > .../bindings/misc/aspeed-p2a-ctrl.txt | 32 +++++++++++++++++++
> > > 1 file changed, 32 insertions(+)
> > > create mode 100644 Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
> > >
> > > diff --git a/Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt b/Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
> > > new file mode 100644
> > > index 000000000000..1092d62d1c92
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt
> > > @@ -0,0 +1,32 @@
> > > +======================================================================
> > > +Device tree bindings for Aspeed AST2400/AST2500 PCI-to-AHB Bridge Control Driver
> > > +======================================================================
> > > +
> > > +The bridge is available on platforms with the VGA enabled on the Aspeed device.
> > > +In this case, the host has access to a 64KiB window into all of the BMC's
> > > +memory. The BMC can disable this bridge. If the bridge is enabled, the host
> > > +has read access to all the regions of memory, however the host only has read
> > > +and write access depending on a register controlled by the BMC.
> > > +
> > > +Required properties:
> > > +===================
> > > +
> > > + - compatible: must be one of:
> > > + - "aspeed,ast2400-p2a-ctrl"
> > > + - "aspeed,ast2500-p2a-ctrl"
> > > +
> > > + - syscon: handle to syscon device node controlling PCI.
> > > +
> > > +Optional properties:
> > > +===================
> > > +
> > > +- memory-region: A phandle to a reserved_memory region to be used for the PCI
> > > + to AHB mapping
> > > +
> > > +Example:
> > > +
> > > +p2a: p2a-control@1e6e2000 {
> > > + compatible = "aspeed,ast2400-p2a-ctrl";
> > > + memory-region = <&reserved_memory>;
> > > + syscon = <&syscon>;
> >
> > Make this node a child of what you are pointing to instead if this the
> > only control interface.
>
> You're suggesting I make this a child of the syscon?
Yes.
Rob
