On Tue, 2014-03-25 at 18:34 -0500, dinguyen@xxxxxxxxxx wrote:
>
> - #size-cells = <1>;
> - compatible = "altr,socfpga-stmmac";
> - altr,sysmgr-syscon = <&sysmgr 0x60>;
> + gmac0: ethernet@ff700000 {
> + compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
> status = "disabled";
> - ranges;
> -
> - gmac0: gmac0@ff700000 {
> - compatible = "snps,dwmac-3.70a", "snps,dwmac";
> - reg = <0xff700000 0x2000>;
> - interrupts = <0 115 4>;
> - interrupt-names = "macirq";
> - mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
> - clocks = <&emac0_clk>;
> - clock-names = "stmmaceth";
> - };
> + altr,sysmgr-syscon = <&sysmgr 0x60>;
> + reg = <0xff700000 0x2000>;
> + interrupts = <0 115 4>;
> + interrupt-names = "macirq";
> + mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
> + clocks = <&emac0_clk>;
> + clock-names = "stmmaceth";
> };
not strictly related to this patch, but noticed in bypassing:
is the 'clocks' spec correct? ISTR that 'emac0_clk' is the PLL
output, while the gated clock for the EMAC IP block is named
'emac_0_clk' (note the extra underscore)
virtually yours
Gerhard Sittig
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr. 5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office@xxxxxxx
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
