[PATCH/RFC 05/15] dt-bindings: display: bridge: thc63lvd1024: Document dual-link operation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The THC63LVD1024 LVDS decoder can operate in two modes, single-link or
dual-link. In dual-link mode both input ports are used to carry even-
and odd-numbered pixels separately. Document this in the DT bindings,
along with the related rules governing port and usage.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
---
 .../bindings/display/bridge/thine,thc63lvd1024.txt         | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt
index 37f0c04d5a28..4ff6eb9bbc19 100644
--- a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt
+++ b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt
@@ -28,6 +28,13 @@ Optional video port nodes:
 - port@1: Second LVDS input port
 - port@3: Second digital CMOS/TTL parallel output
 
+The device can operate in single-link mode or dual-link mode. In single-link
+mode, all pixels are received on port@0, and port@1 shall not contain any
+endpoint. In dual-link mode, even-numbered pixels are received on port@0 and
+odd-numbered pixels on port@1, and both port@0 and port@1 shall contain
+endpoints.
+
+
 Example:
 --------
 
-- 
Regards,

Laurent Pinchart




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux