[PATCH 1/3] ARM: dts: imx6q-logicpd: Shutdown LCD regulator during suspend

[Adam Ford <aford173@xxxxxxxxx>]

The LCD power sequencer is very finicky.  The backlight cannot
be driven until after the sequencer is done.  Until now, the
regulators were marked with 'regulator-always-on' to make sure
it came up before the backlight.  This patch allows the LCD
regulators to power down and prevent the backlight from being
used again until the sequencer is ready.  This reduces
standby power consumption by ~100mW.

Fixes: 1c207f911fe9 ("ARM: dts: imx: Add support for Logic
PD i.MX6QD EVM")

Signed-off-by: Adam Ford <aford173@xxxxxxxxx>

diff --git a/arch/arm/boot/dts/imx6q-logicpd.dts b/arch/arm/boot/dts/imx6q-logicpd.dts
index 45eb0b7f75f8..d96ae54be338 100644
--- a/arch/arm/boot/dts/imx6q-logicpd.dts
+++ b/arch/arm/boot/dts/imx6q-logicpd.dts
@@ -21,6 +21,8 @@
 
 	panel-lvds0 {
 		compatible = "okaya,rs800480t-7x0gp";
+		power-supply = <&reg_lcd_reset>;
+		backlight = <&backlight>;
 
 		port {
 			panel_in_lvds0: endpoint {
@@ -38,7 +40,6 @@
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio4 17 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
-		regulator-always-on;
 		vin-supply = <&reg_3v3>;
 		startup-delay-us = <500000>;
 	};
@@ -52,7 +53,6 @@
 		regulator-max-microvolt = <3300000>;
 		gpio = <&gpio5 2 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
-		regulator-always-on;
 		vin-supply = <&reg_lcd>;
 	};
 };
-- 
2.17.1