On Wed, Mar 06, 2019 at 09:07:17AM +0000, Biju Das wrote: > This series adds USB 3.0 support for the CAT874 platform, including a > new driver for the TI HD3SS3220 USB Type-C DRP port controller. > > This patch series supports: > 1) Host hotplug operation > 2) Device hot plug operation > 3) USB type-C data_role switch > (Tested with 2 RZ/G2E boards connected with a Type-C cable) > > This patchset is based on usb_next and renesas-devel-20190304-v5.0 branch. > > Biju Das (9): > dt-bindings: usb: hd3ss3220 device tree binding document > dt-bindings: usb: renesas_usb3: add extcon support > usb: typec: driver for TI HD3SS3220 USB Type-C DRP port controller > usb: gadget: udc: renesas_usb3: use extcon framework to receive > connect/disconnect Hi Biju, I am marking the patches below as deffered pending acceptance of the dt-bindings patches above. > arm64: defconfig: enable TYPEC_HD3SS3220 config option > arm64: renesas_defconfig: Enable TYPEC_HD3SS3220 config option > arm64: dts: renesas: r8a774c0-cat874: enable USB3.0 host/peripheral > device node > arm64: dts: renesas: r8a774c0-cat874: Enable TI HD3SS3220 support > arm64: dts: renesas: r8a774c0-cat874: Enable extcon support > > .../devicetree/bindings/usb/renesas_usb3.txt | 2 + > .../devicetree/bindings/usb/ti,hd3ss3220.txt | 15 ++ > arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts | 31 +++ > arch/arm64/configs/defconfig | 2 + > arch/arm64/configs/renesas_defconfig | 2 + > drivers/usb/gadget/udc/renesas_usb3.c | 115 +++++++-- > drivers/usb/typec/Kconfig | 10 + > drivers/usb/typec/Makefile | 1 + > drivers/usb/typec/hd3ss3220.c | 284 +++++++++++++++++++++ > 9 files changed, 446 insertions(+), 16 deletions(-) > create mode 100644 Documentation/devicetree/bindings/usb/ti,hd3ss3220.txt > create mode 100644 drivers/usb/typec/hd3ss3220.c > > -- > 2.7.4 >
