Re: [PATCH v10 13/27] pwm: jz4740: Use clocks from TCU driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, Mar 02, 2019 at 08:33:59PM -0300, Paul Cercueil wrote:
> The ingenic-timer "TCU" driver provides us with clocks, that can be
> (un)gated, reparented or reclocked from devicetree, instead of having
> these settings hardcoded in this driver.
> 
> While this driver is devicetree-compatible, it is never (as of now)
> probed from devicetree, so this change does not introduce a ABI problem
> with current devicetree files.
> 
> Note that the "select REGMAP" has been dropped because it's
> already enabled by the "select INGENIC_TIMER".
> 
> Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
> Tested-by: Mathieu Malaterre <malat@xxxxxxxxxx>
> Tested-by: Artur Rojek <contact@xxxxxxxxxxxxxx>
> ---
> 
> Notes:
>          v9: New patch
>     
>          v10: Explain in commit message why "select REGMAP" was dropped
> 
>  drivers/pwm/Kconfig      |  3 ++-
>  drivers/pwm/pwm-jz4740.c | 39 ++++++++++++++++++++++++++-------------
>  2 files changed, 28 insertions(+), 14 deletions(-)
> 
> diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
> index ace8ea4b6247..4e201e970509 100644
> --- a/drivers/pwm/Kconfig
> +++ b/drivers/pwm/Kconfig
> @@ -204,7 +204,8 @@ config PWM_IMX
>  config PWM_JZ4740
>  	tristate "Ingenic JZ47xx PWM support"
>  	depends on MACH_INGENIC
> -	select REGMAP
> +	depends on COMMON_CLK
> +	select INGENIC_TIMER

Okay... sounds like this would be okay. I'm assuming you go through that
extra step of selecting REGMAP in the prior patch and dropping it here
again so that you keep the series bisectible?

>  	help
>  	  Generic PWM framework driver for Ingenic JZ47xx based
>  	  machines.
> diff --git a/drivers/pwm/pwm-jz4740.c b/drivers/pwm/pwm-jz4740.c
> index 8dfac5ffd71c..c6136bd4434b 100644
> --- a/drivers/pwm/pwm-jz4740.c
> +++ b/drivers/pwm/pwm-jz4740.c
> @@ -28,7 +28,7 @@
>  
>  struct jz4740_pwm_chip {
>  	struct pwm_chip chip;
> -	struct clk *clk;
> +	struct clk *clks[NUM_PWM];
>  	struct regmap *map;
>  };
>  
> @@ -40,6 +40,9 @@ static inline struct jz4740_pwm_chip *to_jz4740(struct pwm_chip *chip)
>  static int jz4740_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
>  {
>  	struct jz4740_pwm_chip *jz = to_jz4740(chip);
> +	struct clk *clk;
> +	char clk_name[16];
> +	int ret;
>  
>  	/*
>  	 * Timers 0 and 1 are used for system tasks, so they are unavailable
> @@ -48,16 +51,29 @@ static int jz4740_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm)
>  	if (pwm->hwpwm < 2)
>  		return -EBUSY;
>  
> -	regmap_write(jz->map, TCU_REG_TSCR, BIT(pwm->hwpwm));
> +	snprintf(clk_name, sizeof(clk_name), "timer%u", pwm->hwpwm);
>  
> +	clk = clk_get(chip->dev, clk_name);
> +	if (IS_ERR(clk))
> +		return PTR_ERR(clk);
> +
> +	ret = clk_prepare_enable(clk);
> +	if (ret) {
> +		clk_put(clk);
> +		return ret;
> +	}
> +
> +	jz->clks[pwm->hwpwm] = clk;
>  	return 0;
>  }

Since you're already using ->request(), why not add a per-PWM structure
that tracks the clock? There are a number of other PWMs that already do
something similar. You can use pwm_{set,get}_chip_data() to associate
chip-specific extra data with a PWM.

Thierry

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux