On Fri, Mar 01, 2019 at 08:26:42AM +0100, Michal Vokáč wrote:
> Use rgmii-id phy mode for the CPU port (MAC0) of the QCA8334 switch
> to add delays to both Tx and Rx clock.
>
> It worked with the rgmii mode before because the qca8k driver
> (incorrectly) enabled delays in that mode and rgmii-id was not
> implemented at all.
>
> Commit 5ecdd77c61c8 ("net: dsa: qca8k: disable delay for RGMII mode")
> removed the delays from the RGMII mode and hence broke the networking.
>
> To fix the problem, commit a968b5e9d587 ("net: dsa: qca8k: Enable delay
> for RGMII_ID mode") was introduced.
>
> Now the correct phy mode is available so use it.
>
> Signed-off-by: Michal Vokáč <michal.vokac@xxxxxxxxx>
Applied, thanks.
