Re: [PATCH v4 3/9] staging: iio: ad7780: set pattern values and masks directly

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 2019-02-28 at 11:24 -0300, Renato Lui Geh wrote:
> 
> 
> The AD7780 driver contains status pattern bits designed for checking
> whether serial transfers have been correctly performed. Pattern macros
> were previously generated through bit fields. This patch sets good
> pattern values directly and masks through GENMASK.
> 
> Signed-off-by: Renato Lui Geh <renatogeh@xxxxxxxxx>
> ---
>  drivers/staging/iio/adc/ad7780.c | 20 +++++++++-----------
>  1 file changed, 9 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/staging/iio/adc/ad7780.c
> b/drivers/staging/iio/adc/ad7780.c
> index 7a68e90ddf14..56c49e28f432 100644
> --- a/drivers/staging/iio/adc/ad7780.c
> +++ b/drivers/staging/iio/adc/ad7780.c
> @@ -17,6 +17,7 @@
>  #include <linux/sched.h>
>  #include <linux/gpio/consumer.h>
>  #include <linux/module.h>
> +#include <linux/bits.h>
> 
>  #include <linux/iio/iio.h>
>  #include <linux/iio/sysfs.h>
> @@ -28,16 +29,13 @@
>  #define AD7780_ID1             BIT(4)
>  #define AD7780_ID0             BIT(3)
>  #define AD7780_GAIN            BIT(2)
> -#define AD7780_PAT1            BIT(1)
> -#define AD7780_PAT0            BIT(0)

I don't see a problem to leave the bitfields;  they can be read & matched
easier with the datasheet.

> 
> -#define AD7780_PATTERN         (AD7780_PAT0)
> -#define AD7780_PATTERN_MASK    (AD7780_PAT0 | AD7780_PAT1)
> 
> -#define AD7170_PAT2            BIT(2)

> +#define AD7780_PATTERN_GOOD    1

It was also nice before that the PAT0..PAT2 bitfields were used to define a
good pattern, since it's easier to match with the datasheet.


> +#define AD7780_PATTERN_MASK    GENMASK(1, 0)

I like the general usage of GENMASK, but I'm not sure in this case it's
worth doing. Maybe I missed a discussion somewhere, about doing this
change, but it is mostly a cosmetic without any functional change.


> 
> -#define AD7170_PATTERN         (AD7780_PAT0 | AD7170_PAT2)
> -#define AD7170_PATTERN_MASK    (AD7780_PAT0 | AD7780_PAT1 | AD7170_PAT2)
> +#define AD7170_PATTERN_GOOD    5
> +#define AD7170_PATTERN_MASK    GENMASK(2, 0)
> 
>  #define AD7780_GAIN_MIDPOINT   64
>  #define AD7780_FILTER_MIDPOINT 13350
> @@ -209,25 +207,25 @@ static const struct ad_sigma_delta_info
> ad7780_sigma_delta_info = {
>  static const struct ad7780_chip_info ad7780_chip_info_tbl[] = {
>         [ID_AD7170] = {
>                 .channel = AD7170_CHANNEL(12, 24),
> -               .pattern = AD7170_PATTERN,
> +               .pattern = AD7170_PATTERN_GOOD,
>                 .pattern_mask = AD7170_PATTERN_MASK,
>                 .is_ad778x = false,
>         },
>         [ID_AD7171] = {
>                 .channel = AD7170_CHANNEL(16, 24),
> -               .pattern = AD7170_PATTERN,
> +               .pattern = AD7170_PATTERN_GOOD,
>                 .pattern_mask = AD7170_PATTERN_MASK,
>                 .is_ad778x = false,
>         },
>         [ID_AD7780] = {
>                 .channel = AD7780_CHANNEL(24, 32),
> -               .pattern = AD7780_PATTERN,
> +               .pattern = AD7780_PATTERN_GOOD,
>                 .pattern_mask = AD7780_PATTERN_MASK,
>                 .is_ad778x = true,
>         },
>         [ID_AD7781] = {
>                 .channel = AD7780_CHANNEL(20, 32),
> -               .pattern = AD7780_PATTERN,
> +               .pattern = AD7780_PATTERN_GOOD,
>                 .pattern_mask = AD7780_PATTERN_MASK,
>                 .is_ad778x = true,
>         },
> --
> 2.21.0
> 




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux