Re: [PATCH v2] arm64: dts: ls1028a: Add Audio DT nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Feb 20, 2019 at 04:44:57PM +0800, Alison Wang wrote:
> This patch adds Audio DT nodes for LS1028ARDB and LS1028AQDS boards.
> 
> Signed-off-by: Alison Wang <alison.wang@xxxxxxx>
> ---
> Changes in v2:
>  - Modify some nodes' names.
>  - Use GIC_SPI and IRQ_TYPE_LEVEL_HIGH.
> 
>  arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts |   62 ++++++++++++++++++++
>  arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts |   63 +++++++++++++++++++++
>  arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi    |   57 +++++++++++++++++++
>  3 files changed, 182 insertions(+), 0 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> index 14c79f4..b359068 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-qds.dts
> @@ -32,6 +32,49 @@
>  		device_type = "memory";
>  		reg = <0x0 0x80000000 0x1 0x00000000>;
>  	};
> +
> +	sys_mclk: clock-mclk {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <25000000>;
> +	};
> +
> +	reg_1p8v: regulator-1p8v {
> +		compatible = "regulator-fixed";
> +		regulator-name = "1P8V";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +		regulator-always-on;
> +	};
> +
> +	sound {
> +		compatible = "simple-audio-card";
> +		simple-audio-card,format = "i2s";
> +		simple-audio-card,widgets =
> +			"Microphone", "Microphone Jack",
> +			"Headphone", "Headphone Jack",
> +			"Speaker", "Speaker Ext",
> +			"Line", "Line In Jack";
> +		simple-audio-card,routing =
> +			"MIC_IN", "Microphone Jack",
> +			"Microphone Jack", "Mic Bias",
> +			"LINE_IN", "Line In Jack",
> +			"Headphone Jack", "HP_OUT",
> +			"Speaker Ext", "LINE_OUT";
> +
> +		simple-audio-card,cpu {
> +			sound-dai = <&sai1>;
> +			frame-master;
> +			bitclock-master;
> +		};
> +
> +		simple-audio-card,codec {
> +			sound-dai = <&sgtl5000>;
> +			frame-master;
> +			bitclock-master;
> +			system-clock-frequency = <25000000>;
> +		};
> +	};
>  };
>  
>  &duart0 {
> @@ -89,5 +132,24 @@
>  				reg = <0x57>;
>  			};
>  		};
> +
> +		i2c@5 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0x5>;
> +
> +			sgtl5000: audio-codec@a {
> +				#sound-dai-cells = <0>;
> +				compatible = "fsl,sgtl5000";
> +				reg = <0xa>;
> +				VDDA-supply = <&reg_1p8v>;
> +				VDDIO-supply = <&reg_1p8v>;
> +				clocks = <&sys_mclk>;
> +			};
> +		};
>  	};
>  };
> +
> +&sai1 {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> index fdeb417..50ca51a 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> @@ -28,6 +28,49 @@
>  		device_type = "memory";
>  		reg = <0x0 0x80000000 0x1 0x0000000>;
>  	};
> +
> +	sys_mclk: clock-mclk {
> +		compatible = "fixed-clock";
> +		#clock-cells = <0>;
> +		clock-frequency = <25000000>;
> +	};
> +
> +	reg_1p8v: regulator-1p8v {
> +		compatible = "regulator-fixed";
> +		regulator-name = "1P8V";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +		regulator-always-on;
> +	};
> +
> +	sound {
> +		compatible = "simple-audio-card";
> +		simple-audio-card,format = "i2s";
> +		simple-audio-card,widgets =
> +			"Microphone", "Microphone Jack",
> +			"Headphone", "Headphone Jack",
> +			"Speaker", "Speaker Ext",
> +			"Line", "Line In Jack";
> +		simple-audio-card,routing =
> +			"MIC_IN", "Microphone Jack",
> +			"Microphone Jack", "Mic Bias",
> +			"LINE_IN", "Line In Jack",
> +			"Headphone Jack", "HP_OUT",
> +			"Speaker Ext", "LINE_OUT";
> +
> +		simple-audio-card,cpu {
> +			sound-dai = <&sai4>;
> +			frame-master;
> +			bitclock-master;
> +		};
> +
> +		simple-audio-card,codec {
> +			sound-dai = <&sgtl5000>;
> +			frame-master;
> +			bitclock-master;
> +			system-clock-frequency = <25000000>;
> +		};
> +	};
>  };
>  
>  &i2c0 {
> @@ -39,6 +82,22 @@
>  		#address-cells = <1>;
>  		#size-cells = <0>;
>  
> +		i2c@1 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0x1>;
> +
> +			sgtl5000: audio-codec@a {
> +				#sound-dai-cells = <0>;
> +				compatible = "fsl,sgtl5000";
> +				reg = <0xa>;
> +				VDDA-supply = <&reg_1p8v>;
> +				VDDIO-supply = <&reg_1p8v>;
> +				clocks = <&sys_mclk>;
> +				sclk-strength = <3>;
> +			};
> +		};
> +
>  		i2c@2 {
>  			#address-cells = <1>;
>  			#size-cells = <0>;
> @@ -71,3 +130,7 @@
>  &duart1 {
>  	status = "okay";
>  };
> +
> +&sai4 {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> index a8cf92a..de590ec 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
> @@ -335,5 +335,62 @@
>  				     <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
>  				     <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
>  		};
> +
> +		edma0: dma-controller@22c0000 {

Please sort the node in unit-address.

Shawn

> +			#dma-cells = <2>;
> +			compatible = "fsl,vf610-edma";
> +			reg = <0x0 0x22c0000 0x0 0x10000>,
> +			      <0x0 0x22d0000 0x0 0x10000>,
> +			      <0x0 0x22e0000 0x0 0x10000>;
> +			interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "edma-tx", "edma-err";
> +			dma-channels = <32>;
> +			clock-names = "dmamux0", "dmamux1";
> +			clocks = <&clockgen 4 1>,
> +				 <&clockgen 4 1>;
> +		};
> +
> +		sai1: audio-controller@f100000 {
> +			#sound-dai-cells = <0>;
> +			compatible = "fsl,vf610-sai";
> +			reg = <0x0 0xf100000 0x0 0x10000>;
> +			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
> +				 <&clockgen 4 1>, <&clockgen 4 1>;
> +			clock-names = "bus", "mclk1", "mclk2", "mclk3";
> +			dma-names = "tx", "rx";
> +			dmas = <&edma0 1 4>,
> +			       <&edma0 1 3>;
> +			status = "disabled";
> +		};
> +
> +		sai2: audio-controller@f110000 {
> +			#sound-dai-cells = <0>;
> +			compatible = "fsl,vf610-sai";
> +			reg = <0x0 0xf110000 0x0 0x10000>;
> +			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
> +				 <&clockgen 4 1>, <&clockgen 4 1>;
> +			clock-names = "bus", "mclk1", "mclk2", "mclk3";
> +			dma-names = "tx", "rx";
> +			dmas = <&edma0 1 6>,
> +			       <&edma0 1 5>;
> +			status = "disabled";
> +		};
> +
> +		sai4: audio-controller@f130000 {
> +			#sound-dai-cells = <0>;
> +			compatible = "fsl,vf610-sai";
> +			reg = <0x0 0xf130000 0x0 0x10000>;
> +			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
> +			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
> +				 <&clockgen 4 1>, <&clockgen 4 1>;
> +			clock-names = "bus", "mclk1", "mclk2", "mclk3";
> +			dma-names = "tx", "rx";
> +			dmas = <&edma0 1 10>,
> +			       <&edma0 1 9>;
> +			status = "disabled";
> +		};
>  	};
>  };
> -- 
> 1.7.1
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux