According to the schematics, this is a MP2147 switch converter
which is controlled by GPIO1_IO13. When set the gpio is set to
high the regulator output is set to 0.9V. When the gpio is set
to low the regulator output is set to 1V.
Signed-off-by: Abel Vesa <abel.vesa@xxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 35 ++++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index 54737bf..afea110 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -31,6 +31,34 @@
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
+
+ buck2_reg: regulator-buck2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_buck2>;
+ compatible = "regulator-gpio";
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1000000>;
+ gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+ states = <1000000 0x0
+ 900000 0x1>;
+ };
+};
+
+&A53_0 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&A53_1 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&A53_2 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&A53_3 {
+ cpu-supply = <&buck2_reg>;
};
&fec1 {
@@ -203,6 +231,13 @@
};
&iomuxc {
+ pinctrl_buck2: vddarmgrp {
+ fsl,pins = <
+ MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x19
+ >;
+
+ };
+
pinctrl_fec1: fec1grp {
fsl,pins = <
MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3
--
2.7.4
