This patch adds the new feature of reading the filter odr value for ad778x chips. This value is stored in the chip's state struct whenever a read or write call is performed on the chip's driver. This feature requires sharing SAMP_FREQ. Since the ad717x does not have a filter option, the driver only shares the relevant info mask for the ad778x family. Signed-off-by: Renato Lui Geh <renatogeh@xxxxxxxxx> --- Changes in v4: - As mentioned in the previous patch, this was originally as part of the 'add gain & filter gpio support' patch drivers/staging/iio/adc/ad7780.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/staging/iio/adc/ad7780.c b/drivers/staging/iio/adc/ad7780.c index 87fbcf510d45..7a68e90ddf14 100644 --- a/drivers/staging/iio/adc/ad7780.c +++ b/drivers/staging/iio/adc/ad7780.c @@ -59,6 +59,7 @@ struct ad7780_state { struct gpio_desc *gain_gpio; struct gpio_desc *filter_gpio; unsigned int gain; + unsigned int odr; unsigned int int_vref_mv; struct ad_sigma_delta sd; @@ -121,6 +122,9 @@ static int ad7780_read_raw(struct iio_dev *indio_dev, case IIO_CHAN_INFO_OFFSET: *val = -(1 << (chan->scan_type.realbits - 1)); return IIO_VAL_INT; + case IIO_CHAN_INFO_SAMP_FREQ: + *val = st->odr; + return IIO_VAL_INT; default: break; } @@ -163,6 +167,7 @@ static int ad7780_write_raw(struct iio_dev *indio_dev, val = 0; else val = 1; + st->odr = ad778x_odr_avail[val]; gpiod_set_value(st->filter_gpio, val); break; default: @@ -184,6 +189,7 @@ static int ad7780_postprocess_sample(struct ad_sigma_delta *sigma_delta, if (chip_info->is_ad778x) { st->gain = ad778x_gain[raw_sample & AD7780_GAIN]; + st->odr = ad778x_odr_avail[raw_sample & AD7780_FILTER]; } return 0; @@ -196,17 +202,19 @@ static const struct ad_sigma_delta_info ad7780_sigma_delta_info = { }; #define AD7780_CHANNEL(bits, wordsize) \ + AD_SD_CHANNEL(1, 0, 0, bits, 32, wordsize - bits) +#define AD7170_CHANNEL(bits, wordsize) \ AD_SD_CHANNEL_NO_SAMP_FREQ(1, 0, 0, bits, 32, wordsize - bits) static const struct ad7780_chip_info ad7780_chip_info_tbl[] = { [ID_AD7170] = { - .channel = AD7780_CHANNEL(12, 24), + .channel = AD7170_CHANNEL(12, 24), .pattern = AD7170_PATTERN, .pattern_mask = AD7170_PATTERN_MASK, .is_ad778x = false, }, [ID_AD7171] = { - .channel = AD7780_CHANNEL(16, 24), + .channel = AD7170_CHANNEL(16, 24), .pattern = AD7170_PATTERN, .pattern_mask = AD7170_PATTERN_MASK, .is_ad778x = false, -- 2.21.0