Wolfgang Sang pointed out that "efm32,$device" is non-standard. So use the
common scheme and prefix device with "efm32-". The old compatible string
is left in place until arch/arm/boot/dts/efm32* is fixed.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>
---
Changes since (implicit) v1, sent with
Message-id:1395755954-18988-1-git-send-email-u.kleine-koenig@xxxxxxxxxxxxxx:
- fix binding doc accordingly
Documentation/devicetree/bindings/serial/efm32-uart.txt | 4 ++--
drivers/tty/serial/efm32-uart.c | 3 +++
2 files changed, 5 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/serial/efm32-uart.txt b/Documentation/devicetree/bindings/serial/efm32-uart.txt
index 1984bdfbd545..3ca01336b837 100644
--- a/Documentation/devicetree/bindings/serial/efm32-uart.txt
+++ b/Documentation/devicetree/bindings/serial/efm32-uart.txt
@@ -1,7 +1,7 @@
* Energymicro efm32 UART
Required properties:
-- compatible : Should be "efm32,uart"
+- compatible : Should be "energymicro,efm32-uart"
- reg : Address and length of the register set
- interrupts : Should contain uart interrupt
@@ -13,7 +13,7 @@ Optional properties:
Example:
uart@0x4000c400 {
- compatible = "efm32,uart";
+ compatible = "energymicro,efm32-uart";
reg = <0x4000c400 0x400>;
interrupts = <15>;
efm32,location = <0>;
diff --git a/drivers/tty/serial/efm32-uart.c b/drivers/tty/serial/efm32-uart.c
index 028582e924a5..c167a710dc39 100644
--- a/drivers/tty/serial/efm32-uart.c
+++ b/drivers/tty/serial/efm32-uart.c
@@ -798,6 +798,9 @@ static int efm32_uart_remove(struct platform_device *pdev)
static const struct of_device_id efm32_uart_dt_ids[] = {
{
+ .compatible = "energymicro,efm32-uart",
+ }, {
+ /* doesn't follow the "vendor,device" scheme, don't use */
.compatible = "efm32,uart",
}, {
/* sentinel */
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
