Best Regards!
Anson Huang
> -----Original Message-----
> From: Aisheng Dong
> Sent: 2019年2月26日 20:01
> To: Anson Huang <anson.huang@xxxxxxx>; Eduardo Valentin
> <edubezval@xxxxxxxxx>
> Cc: robh+dt@xxxxxxxxxx; mark.rutland@xxxxxxx; shawnguo@xxxxxxxxxx;
> s.hauer@xxxxxxxxxxxxxx; kernel@xxxxxxxxxxxxxx; festevam@xxxxxxxxx;
> catalin.marinas@xxxxxxx; will.deacon@xxxxxxx; rui.zhang@xxxxxxxxx;
> daniel.lezcano@xxxxxxxxxx; ulf.hansson@xxxxxxxxxx; sboyd@xxxxxxxxxx;
> Daniel Baluta <daniel.baluta@xxxxxxx>; Andy Gross
> <andy.gross@xxxxxxxxxx>; horms+renesas@xxxxxxxxxxxx; heiko@xxxxxxxxx;
> arnd@xxxxxxxx; maxime.ripard@xxxxxxxxxxx; bjorn.andersson@xxxxxxxxxx;
> jagan@xxxxxxxxxxxxxxxxxxxx; enric.balletbo@xxxxxxxxxxxxx;
> marc.w.gonzalez@xxxxxxx; olof@xxxxxxxxx; devicetree@xxxxxxxxxxxxxxx;
> linux-kernel@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux-
> pm@xxxxxxxxxxxxxxx; dl-linux-imx <linux-imx@xxxxxxx>
> Subject: RE: [PATCH V8 1/4] dt-bindings: fsl: scu: add thermal binding
>
> [...]
> > > On Thu, Feb 21, 2019 at 06:38:30AM +0000, Anson Huang wrote:
> > > > NXP i.MX8QXP is an ARMv8 SoC with a Cortex-M4 core inside as
> > > > system controller, the system controller is in charge of system
> > > > power, clock and thermal sensors etc. management, Linux kernel has
> > > > to communicate with system controller via MU (message unit) IPC to
> > > > get temperature from thermal sensors, this patch adds binding doc
> > > > for i.MX system controller thermal driver.
> > > >
> > > > Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
> > > > Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
>
> You need drop the former Reviewed-by once there's significant changes.
>
> > > > +Thermal bindings based on SCU Message Protocol
> > > > +------------------------------------------------------------
> > > > +
> > > > +Required properties:
> > > > +- compatible: Should be :
> > > > + "fsl,imx8qxp-sc-thermal"
> > > > + followed by "fsl,imx-sc-thermal";
> > > > +
> > > > +- #thermal-sensor-cells: See
> > > Documentation/devicetree/bindings/thermal/thermal.txt
> > > > + for a description.
> > > > +
> > > > +- imx,sensor-resource-id: Property array to specify each
> thermal
> > zone's
> > > sensor resource ID.
> > >
> > > If this is an array...
> > >
> > > > +
> > > > Example (imx8qxp):
> > > > -------------
> > > > lsio_mu1: mailbox@5d1c0000 {
> > > > @@ -168,6 +181,12 @@ firmware {
> > > > rtc: rtc {
> > > > compatible = "fsl,imx8qxp-sc-rtc";
> > > > };
> > > > +
> > > > + tsens: thermal-sensor {
> > > > + compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-
> > > thermal";
> > > > + #thermal-sensor-cells = <0>;
> > > > + imx,sensor-resource-id = <IMX_SC_R_SYSTEM>;
> > >
> > > then this example should have an array, to be better express how
> > > this is supposed to work. Can you please resend this with an array
> instead?
> >
> > On i.MX8QXP, there is ONLY 1 thermal zone available currently, but the
> > thermal driver is supposed to support multi thermal zones as well for
> > i.MX8QM, in V9 patch set I just sent, I use the "
> > imx,sensor-resource-id " element count to determine how many thermal
> > sensors will be supported, so that we can also get rid of searching
> > the thermal-zones' child node, I improved the description as below, is it OK?
> >
>
> Device tree is used to describe HW.
> #thermal-sensor-cells is less to be an optional parameter to me.
> If HW supports, then it should be 1 and update the example accordingly.
OK, I changed it to "1" in V10 patch series.
Thanks,
Anson.
>
> Regards
> Dong Aisheng
>
> > 41 +- imx,sensor-resource-id: A single integer for single thermal zone's
> > resource ID or
> > 42 + an array of integers to specify each
> > thermal zone's sensor
> > 43 + resource ID.
