This series adds support for Keymile's COGE4 board, called kmcoge4. This board is the reference design for further designs at Keymile around the P2040/P2041 SoCs from Freescale. This reference design is internally called kmp204x. Changes in v3: - add a patch with the bindings for the KEYMILE FPGAs - add the compatible strings for the localbus nodes - remove the IRQ part of the board-control node as it is currently being reworked Changes in v2: - add a patch so that the Zarlink vendor prefix is defined - add some nodes on the localbus CS when possible - only use the corenet_generic machine and add kmcoge4 to the supported boards instead of defining a new kmp204x machine - set better and more precise device nodes for the spi devices - remove the partion layout for the spi_flash@0 Valentin Longchamp (3): devicetree: bindings: add Zarlink to the vendor prefixes devcietree: bindings: add some MFD Keymile FPGAs powerpc/mpc85xx: add support for Keymile's kmcoge4 board Documentation/devicetree/bindings/mfd/bfticu.txt | 26 +++ Documentation/devicetree/bindings/mfd/qriox.txt | 17 ++ .../devicetree/bindings/vendor-prefixes.txt | 2 + arch/powerpc/boot/dts/kmcoge4.dts | 157 ++++++++++++++ arch/powerpc/configs/85xx/kmp204x_defconfig | 227 +++++++++++++++++++++ arch/powerpc/platforms/85xx/Kconfig | 2 +- arch/powerpc/platforms/85xx/corenet_generic.c | 3 +- 7 files changed, 432 insertions(+), 2 deletions(-) create mode 100644 Documentation/devicetree/bindings/mfd/bfticu.txt create mode 100644 Documentation/devicetree/bindings/mfd/qriox.txt create mode 100644 arch/powerpc/boot/dts/kmcoge4.dts create mode 100644 arch/powerpc/configs/85xx/kmp204x_defconfig -- 1.8.0.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
