The VCC supply property is not populated for the temperature sensor on
the P2888 board and so the following warning is observed on boot ...
lm90 0-004c: 0-004c supply vcc not found, using dummy regulator
On the P2888 board, the VCC supply for the temperature sensor is
connected to the 'vdd_1v8ls' rail. Add the 'vcc-supply' property for
the temperature sensor to prevent this warning message from occurring.
Fixes: 8b457812f54b ('arm64: tegra: Add temperature sensor on P2888')
Signed-off-by: Jon Hunter <jonathanh@xxxxxxxxxx>
---
arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
index 246c1ebbd055..0fd5bd29fbf9 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
@@ -256,6 +256,7 @@
interrupt-parent = <&gpio>;
interrupts = <TEGRA194_MAIN_GPIO(H, 2)
IRQ_TYPE_LEVEL_LOW>;
+ vcc-supply = <&vdd_1v8ls>;
#thermal-sensor-cells = <1>;
};
--
2.7.4
