This patch adds a simple typec switch driver which only needs
a GPIO to switch the super speed active channel according to
typec orientation.
Signed-off-by: Li Jun <jun.li@xxxxxxx>
---
drivers/usb/typec/mux/Kconfig | 6 +++
drivers/usb/typec/mux/Makefile | 1 +
drivers/usb/typec/mux/gpio-switch.c | 105 ++++++++++++++++++++++++++++++++++++
3 files changed, 112 insertions(+)
create mode 100644 drivers/usb/typec/mux/gpio-switch.c
diff --git a/drivers/usb/typec/mux/Kconfig b/drivers/usb/typec/mux/Kconfig
index 01ed0d5..bc7d3c7 100644
--- a/drivers/usb/typec/mux/Kconfig
+++ b/drivers/usb/typec/mux/Kconfig
@@ -9,4 +9,10 @@ config TYPEC_MUX_PI3USB30532
Say Y or M if your system has a Pericom PI3USB30532 Type-C cross
switch / mux chip found on some devices with a Type-C port.
+config TYPEC_SWITCH_GPIO
+ tristate "Simple Super Speed Active Switch via GPIO"
+ help
+ Say Y or M if your system has a typec super speed channel
+ switch via a simple GPIO control.
+
endmenu
diff --git a/drivers/usb/typec/mux/Makefile b/drivers/usb/typec/mux/Makefile
index 1332e46..e29377c 100644
--- a/drivers/usb/typec/mux/Makefile
+++ b/drivers/usb/typec/mux/Makefile
@@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0
obj-$(CONFIG_TYPEC_MUX_PI3USB30532) += pi3usb30532.o
+obj-$(CONFIG_TYPEC_SWITCH_GPIO) += gpio-switch.o
diff --git a/drivers/usb/typec/mux/gpio-switch.c b/drivers/usb/typec/mux/gpio-switch.c
new file mode 100644
index 0000000..a51da68
--- /dev/null
+++ b/drivers/usb/typec/mux/gpio-switch.c
@@ -0,0 +1,105 @@
+// SPDX-License-Identifier: GPL-2.0
+/**
+ * gpio-switch.c - typec switch via a simple GPIO control.
+ *
+ * Copyright 2019 NXP
+ * Author: Jun Li <jun.li@xxxxxxx>
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/usb/typec_mux.h>
+
+struct gpio_typec_switch {
+ struct typec_switch sw;
+ struct mutex lock;
+ struct gpio_desc *ss_sel;
+};
+
+static int switch_gpio_set(struct typec_switch *sw,
+ enum typec_orientation orientation)
+{
+ struct gpio_typec_switch *gpio_sw = container_of(sw,
+ struct gpio_typec_switch, sw);
+
+ mutex_lock(&gpio_sw->lock);
+
+ switch (orientation) {
+ case TYPEC_ORIENTATION_NORMAL:
+ gpiod_set_value_cansleep(gpio_sw->ss_sel, 1);
+ break;
+ case TYPEC_ORIENTATION_REVERSE:
+ gpiod_set_value_cansleep(gpio_sw->ss_sel, 0);
+ break;
+ case TYPEC_ORIENTATION_NONE:
+ break;
+ }
+
+ mutex_unlock(&gpio_sw->lock);
+
+ return 0;
+}
+
+static int typec_switch_gpio_probe(struct platform_device *pdev)
+{
+ struct gpio_typec_switch *gpio_sw;
+ struct device *dev = &pdev->dev;
+ int ret;
+
+ gpio_sw = devm_kzalloc(dev, sizeof(*gpio_sw), GFP_KERNEL);
+ if (!gpio_sw)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, gpio_sw);
+
+ gpio_sw->sw.dev = dev;
+ gpio_sw->sw.set = switch_gpio_set;
+ mutex_init(&gpio_sw->lock);
+
+ /* Get the super speed active channel selection GPIO */
+ gpio_sw->ss_sel = devm_gpiod_get(dev, NULL, GPIOD_OUT_LOW);
+ if (IS_ERR(gpio_sw->ss_sel))
+ return PTR_ERR(gpio_sw->ss_sel);
+
+ ret = typec_switch_register(&gpio_sw->sw);
+ if (ret) {
+ dev_err(dev, "Error registering typec switch: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int typec_switch_gpio_remove(struct platform_device *pdev)
+{
+ struct gpio_typec_switch *gpio_sw = platform_get_drvdata(pdev);
+
+ typec_switch_unregister(&gpio_sw->sw);
+
+ return 0;
+}
+
+static const struct of_device_id of_typec_switch_gpio_match[] = {
+ { .compatible = "nxp,ptn36043" },
+ { /* Sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, of_typec_switch_gpio_match);
+
+static struct platform_driver typec_switch_gpio_driver = {
+ .probe = typec_switch_gpio_probe,
+ .remove = typec_switch_gpio_remove,
+ .driver = {
+ .name = "typec-switch-gpio",
+ .of_match_table = of_typec_switch_gpio_match,
+ },
+};
+
+module_platform_driver(typec_switch_gpio_driver);
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("TypeC Super Speed Switch GPIO driver");
+MODULE_AUTHOR("Jun Li <jun.li@xxxxxxx>");
--
2.7.4
