> --- /dev/null
> +++ b/Documentation/devicetree/bindings/i2c/i2c-efm32.txt
> @@ -0,0 +1,34 @@
> +* Energymicro efm32 i2c controller
> +
> +Required properties :
> +
> + - reg : Offset and length of the register set for the device
> + - compatible : should be "efm32,i2c"
Ehrm, come to think of it, shouldn't that actually be "energymicro, efm32-i2c"
or similar to match the "vendor,product" pattern?
> +config I2C_EFM32
> + tristate "EFM32 I2C controller"
> + depends on OF && (ARCH_EFM32 || COMPILE_TEST)
Is EFM32 DT only? Do we need the dependency on OF?
> + help
> + This driver supports the i2c block found in Energy Micro's EFM32
> + SoCs.
> +
...
> +static void efm32_i2c_send_next_byte(struct efm32_i2c_ddata *ddata)
> +{
> + struct i2c_msg *cur_msg = &ddata->msgs[ddata->current_msg];
Missing newline.
> + if (ddata->current_word >= cur_msg->len) {
> + /* cur_msg completely transferred */
> + ddata->current_word = 0;
> + ddata->current_msg += 1;
> +
> + if (ddata->current_msg >= ddata->num_msgs) {
> + efm32_i2c_write32(ddata, REG_CMD, REG_CMD_STOP);
> + complete(&ddata->done);
> + } else {
> + efm32_i2c_send_next_msg(ddata);
> + }
> + } else {
> + efm32_i2c_write32(ddata, REG_TXDATA,
> + cur_msg->buf[ddata->current_word++]);
> + }
> +}
> +
...
> +static int efm32_i2c_master_xfer(struct i2c_adapter *adap,
> + struct i2c_msg *msgs, int num)
> +{
> + struct efm32_i2c_ddata *ddata = i2c_get_adapdata(adap);
> + int ret;
> +
> + if (ddata->msgs)
> + return -EBUSY;
> +
> + ddata->msgs = msgs;
> + ddata->num_msgs = num;
> + ddata->current_word = 0;
> + ddata->current_msg = 0;
> + ddata->retval = -EIO;
> +
> + reinit_completion(&ddata->done);
> +
> + dev_dbg(&ddata->adapter.dev, "state: %08x, status: %08x\n",
> + efm32_i2c_read32(ddata, REG_STATE),
> + efm32_i2c_read32(ddata, REG_STATUS));
> +
> + efm32_i2c_send_next_msg(ddata);
> +
> + wait_for_completion(&ddata->done);
> +
> + if (ddata->current_msg >= ddata->num_msgs)
> + ret = ddata->num_msgs;
> + else
> + ret = ddata->retval;
> +
> + ddata->msgs = NULL;
Setting NULL should not be needed?
> +
> + return ret;
> +}
> +
And checkpatch said:
WARNING: braces {} are not necessary for any arm of this statement
#345: FILE: drivers/i2c/busses/i2c-efm32.c:239:
+ if (cur_msg->flags & I2C_M_RD) {
...
Thanks,
Wolfram
Attachment:
signature.asc
Description: Digital signature
