For common stmmac:
- Add support to set CSR Clock range selection in DT
For stm32mpu:
- Glue codes to support magic packet
- Glue codes to support all PHY config :
PHY_MODE (MII,GMII, RMII, RGMII) and in normal,
PHY wo crystal (25Mhz),
PHY wo crystal (50Mhz), No 125Mhz from PHY config
For stm32mcu:
- Add Ethernet support for stm32h7
- Add syscfg clk support for stm32f4
Changes in V2:
Apply remarks from andrew lunn
- add all interfaces RGMII*
- reg value should be the same as ethernet-phy@X
Christophe Roullier (8):
net: ethernet: stmmac: manage Ethernet WoL for stm32mp157c.
net: ethernet: stmmac: update to support all PHY config for
stm32mp157c.
dt-bindings: net: stmmac: add phys config properties
net: ethernet: stmmac: add management of clk_csr property
net: ethernet: stmmac: update to be compatible with MCU family
(stm32f4, stm32h7)
dt-bindings: net: stmmac: add syscfg clock property
ARM: dts: stm32: Add Ethernet support on stm32h7 SOC and activate it
for eval and disco boards
ARM: dts: stm32: add syscfg clock support for Ethernet on STM32F429
SoC
.../devicetree/bindings/net/stm32-dwmac.txt | 10 +-
arch/arm/boot/dts/stm32f429.dtsi | 6 +-
arch/arm/boot/dts/stm32h743-pinctrl.dtsi | 15 ++
arch/arm/boot/dts/stm32h743.dtsi | 19 +++
arch/arm/boot/dts/stm32h743i-disco.dts | 17 ++
arch/arm/boot/dts/stm32h743i-eval.dts | 17 ++
drivers/net/ethernet/stmicro/stmmac/dwmac-stm32.c | 182 +++++++++++++++++----
.../net/ethernet/stmicro/stmmac/stmmac_platform.c | 3 +
8 files changed, 233 insertions(+), 36 deletions(-)
--
2.7.4
