On 21/02/2019 at 14:45, Claudiu Beznea - M18063 wrote: > From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx> > > Add documentation for SAM9X60 shutdown controller. > > Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx> Acked-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxxxxxx> Thanks Claudiu. Regards, Nicolas > --- > Documentation/devicetree/bindings/arm/atmel-sysregs.txt | 5 ++++- > 1 file changed, 4 insertions(+), 1 deletion(-) > > diff --git a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt > index 14f319f694b7..50f282ccbcb7 100644 > --- a/Documentation/devicetree/bindings/arm/atmel-sysregs.txt > +++ b/Documentation/devicetree/bindings/arm/atmel-sysregs.txt > @@ -83,7 +83,7 @@ SHDWC SAMA5D2-Compatible Shutdown Controller > 1) shdwc node > > required properties: > -- compatible: should be "atmel,sama5d2-shdwc". > +- compatible: should be "atmel,sama5d2-shdwc" or "microchip,sam9x60-shdwc". > - reg: should contain registers location and length > - clocks: phandle to input clock. > - #address-cells: should be one. The cell is the wake-up input index. > @@ -95,6 +95,9 @@ optional properties: > microseconds. It's usually a board-related property. > - atmel,wakeup-rtc-timer: boolean to enable Real-Time Clock wake-up. > > +optional microchip,sam9x60-shdwc properties: > +- atmel,wakeup-rtt-timer: boolean to enable Real-time Timer Wake-up. > + > The node contains child nodes for each wake-up input that the platform uses. > > 2) input nodes > -- Nicolas Ferre
