From: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
The driver requires an undocumented clock property, so detail it.
Add documentation for a separate, optional, bus clock.
Signed-off-by: Phil Edworthy <phil.edworthy@xxxxxxxxxxx>
v3:
- Changed clocks and clock-names sections to use term "peripheral clock"
(pclk) instead of "bus clock" (busclk).
v2:
- No changes.
v1:
- Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
---
Documentation/devicetree/bindings/i2c/i2c-designware.txt | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
index 3e4bcc2..f94aa59 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
@@ -6,12 +6,21 @@ Required properties :
or "mscc,ocelot-i2c" with "snps,designware-i2c" for fallback
- reg : Offset and length of the register set for the device
- interrupts : <IRQ> where IRQ is the interrupt number.
+ - clocks : phandles for the clocks, see the description of clock-names below.
+ The phandle for the "ic_clk" clock is required. The phandle for the "pclk"
+ clock is optional. If a single clock is specified but no clock-name, it is
+ the "ic_clk" clock. If both clocks are listed, the "ic_clk" must be first.
Recommended properties :
- clock-frequency : desired I2C bus clock frequency in Hz.
Optional properties :
+
+ - clock-names : Contains the names of the clocks:
+ "ic_clk", for the core clock used to generate the external I2C clock.
+ "pclk", the peripheral clock, required for register accesses.
+
- reg : for "mscc,ocelot-i2c", a second register set to configure the SDA hold
time, named ICPU_CFG:TWI_DELAY in the datasheet.
--
2.7.4
