Add DT nodes for
- Two xHCI host controllers
- Two BDC Broadcom USB device controller
- Five USB PHY controllers
[xHCI0] [BDC0] [xHCI1] [BDC1]
| | | |
--------------- -----------------------
| | | | |
[SS-PHY0] [HS-PHY0] [SS-PHY1] [HS-PHY2] [HS-PHY1]
[SS-PHY0/HS-PHY0] and [SS-PHY1/HS-PHY1] are combo PHYs has one SS and
one HS PHYs. [HS-PHY2] is a single HS PHY.
xHCI use SS-PHY to detect SS devices and HS-PHY to detect HS/FS/LS
devices. BDC use SS-PHY in SS mode and HS-PHY in HS mode.
xHCI0 port1 is SS-PHY0, port2 is HS-PHY0.
xHCI1 port1 is SS-PHY1, port2 is HS-PHY2 and port3 is HS-PHY1.
Signed-off-by: Srinath Mannam <srinath.mannam@xxxxxxxxxxxx>
Reviewed-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Reviewed-by: Scott Branden <scott.branden@xxxxxxxxxxxx>
---
.../boot/dts/broadcom/stingray/stingray-usb.dtsi | 95 ++++++++++++++++++++++
.../arm64/boot/dts/broadcom/stingray/stingray.dtsi | 1 +
2 files changed, 96 insertions(+)
create mode 100644 arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi
new file mode 100644
index 0000000..c0748ee
--- /dev/null
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray-usb.dtsi
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: (GPL-2.0 or BSD-3-Clause)
+/*
+ *Copyright(c) 2018 Broadcom
+ */
+ usb {
+ compatible = "simple-bus";
+ dma-ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x68500000 0x00400000>;
+
+ usbphy0: usb-phy@0 {
+ compatible = "brcm,sr-usb-combo-phy";
+ reg = <0x00000000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ usb0_phy0: phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+ usb0_phy1: phy@1 {
+ reg = <1>;
+ #phy-cells = <0>;
+ };
+
+ };
+
+ xhci0: usb@1000 {
+ compatible = "generic-xhci";
+ reg = <0x00001000 0x1000>;
+ interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb0_phy1>, <&usb0_phy0>;
+ phy-names = "phy0", "phy1";
+ dma-coherent;
+ status = "disabled";
+ };
+
+ bdc0: usb@2000 {
+ compatible = "brcm,bdc-v0.16";
+ reg = <0x00002000 0x1000>;
+ interrupts = <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb0_phy1>, <&usb0_phy0>;
+ phy-names = "phy0", "phy1";
+ dma-coherent;
+ status = "disabled";
+ };
+
+ usbphy1: usb-phy@10000 {
+ compatible = "brcm,sr-usb-combo-phy";
+ reg = <0x00010000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ usb1_phy0: phy@0 {
+ reg = <0>;
+ #phy-cells = <0>;
+ };
+ usb1_phy1: phy@1 {
+ reg = <1>;
+ #phy-cells = <0>;
+ };
+ };
+
+ usbphy2: usb-phy@20000 {
+ compatible = "brcm,sr-usb-hs-phy";
+ reg = <0x00020000 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ xhci1: usb@11000 {
+ compatible = "generic-xhci";
+ reg = <0x00011000 0x1000>;
+ interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usb1_phy1>, <&usbphy2>, <&usb1_phy0>;
+ phy-names = "phy0", "phy1", "phy2";
+ dma-coherent;
+ status = "disabled";
+ };
+
+ bdc1: usb@21000 {
+ compatible = "brcm,bdc-v0.16";
+ reg = <0x00021000 0x1000>;
+ interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usbphy2>;
+ phy-names = "phy0";
+ dma-coherent;
+ status = "disabled";
+ };
+ };
diff --git a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
index cfeaa85..21dbb12 100644
--- a/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
+++ b/arch/arm64/boot/dts/broadcom/stingray/stingray.dtsi
@@ -287,6 +287,7 @@
#include "stingray-fs4.dtsi"
#include "stingray-sata.dtsi"
#include "stingray-pcie.dtsi"
+ #include "stingray-usb.dtsi"
hsls {
compatible = "simple-bus";
--
2.7.4
