On Sun, Feb 17, 2019 at 1:09 AM Yong Wu <yong.wu@xxxxxxxxxxxx> wrote:
>
> In the 4GB mode, the physical address is remapped,
>
> Here is the detailed remap relationship.
> CPU PA -> HW PA
> 0x4000_0000 0x1_4000_0000 (Add bit32)
> 0x8000_0000 0x1_8000_0000 ...
> 0xc000_0000 0x1_c000_0000 ...
> 0x1_0000_0000 0x1_0000_0000 (No change)
>
> Thus, we always add bit32 for PA when entering mtk_iommu_map.
> But in the iova_to_phys, the CPU don't need this bit32 if the
> PA is from 0x1_4000_0000 to 0x1_ffff_ffff.
> This patch discards the bit32 in this iova_to_phys in the 4GB mode.
>
> Signed-off-by: Yong Wu <yong.wu@xxxxxxxxxxxx>
> ---
> drivers/iommu/mtk_iommu.c | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
>
> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> index 0277396..076d333 100644
> --- a/drivers/iommu/mtk_iommu.c
> +++ b/drivers/iommu/mtk_iommu.c
> @@ -119,6 +119,19 @@ struct mtk_iommu_domain {
>
> static const struct iommu_ops mtk_iommu_ops;
>
> +/*
> + * In M4U 4GB mode, the physical address is remapped as below:
> + * CPU PA -> M4U HW PA
> + * 0x4000_0000 0x1_4000_0000 (Add bit32)
> + * 0x8000_0000 0x1_8000_0000 ...
> + * 0xc000_0000 0x1_c000_0000 ...
> + * 0x1_0000_0000 0x1_0000_0000 (No change)
> + *
> + * Thus, We always add BIT32 in the iommu_map and disable BIT32 if PA is >=
> + * 0x1_4000_0000 in the iova_to_phys.
> + */
> +#define MTK_IOMMU_4GB_MODE_PA_140000000 0x140000000UL
> +
> static LIST_HEAD(m4ulist); /* List all the M4U HWs */
>
> #define for_each_m4u(data) list_for_each_entry(data, &m4ulist, list)
> @@ -415,6 +428,7 @@ static phys_addr_t mtk_iommu_iova_to_phys(struct iommu_domain *domain,
> dma_addr_t iova)
> {
> struct mtk_iommu_domain *dom = to_mtk_domain(domain);
> + struct mtk_iommu_data *data = mtk_iommu_get_m4u_data();
> unsigned long flags;
> phys_addr_t pa;
>
> @@ -422,6 +436,10 @@ static phys_addr_t mtk_iommu_iova_to_phys(struct iommu_domain *domain,
> pa = dom->iop->iova_to_phys(dom->iop, iova);
> spin_unlock_irqrestore(&dom->pgtlock, flags);
>
> + if (data->plat_data->has_4gb_mode && data->dram_is_4gb &&
> + pa >= MTK_IOMMU_4GB_MODE_PA_140000000)
> + pa &= ~BIT_ULL(32);
> +
The define doesn't really make it much better, but I guess it doesn't
make it worse either. As I was reviewing this I was thinking that this
should be rolled into patch 6 "iommu/io-pgtable-arm-v7s: Extend
MediaTek 4GB Mode". But I guess this was returning bad PAs since
before this series, right? So does this need a Fixes tag?
-Evan
