On 19/2/2019 4:32 AM, Rob Herring wrote:
> On Tue, Dec 18, 2018 at 03:34:43PM +0800, Wei Ni wrote:
>> Add OC HW throttle configuration for soctherm in DT.
>> It is used to describe the OCx throttle events.
>>
>> Signed-off-by: Wei Ni <wni@xxxxxxxxxx>
>> ---
>> .../bindings/thermal/nvidia,tegra124-soctherm.txt | 26 ++++++++++++++++++++++
>> 1 file changed, 26 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt
>> index cf6d0be56b7a..d112a8e59ec3 100644
>> --- a/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt
>> +++ b/Documentation/devicetree/bindings/thermal/nvidia,tegra124-soctherm.txt
>> @@ -64,6 +64,21 @@ Required properties :
>> - #cooling-cells: Should be 1. This cooling device only support on/off state.
>> See ./thermal.txt for a description of this property.
>>
>> + Optional properties: The following properties are T210 specific and
>> + valid only for OCx throttle events.
>> + - nvidia,count-threshold: Specifies the number of OC events that are
>> + required for triggering an interrupt. Interrupts are not triggered if
>> + the property is missing. A value of 0 will interrupt on every OC alarm.
>> + - nvidia,polarity-active-low: Configures the polarity of the OC alaram
>> + signal. Accepted values are 1 for assert low and 0 for assert high.
>> + Default value is 0.
>
> Why not boolean?
Ok, will change to use boolean.
>
>> + - nvidia,alarm-filter: Number of clocks to filter event. When the filter
>> + expires (which means the OC event has not occurred for a long time),
>> + the counter is cleared and filter is rearmed. Default value is 0.
>> + - nvidia,throttle-period: Specifies the number of uSec for which
>> + throttling is engaged after the OC event is deasserted. Default value
>> + is 0.
>
> Needs a unit suffix as defined in property-units.txt.
Yes, will add suffix "-us" for it.
>
>> +
>> Optional properties:
>> - nvidia,thermtrips : When present, this property specifies the temperature at
>> which the soctherm hardware will assert the thermal trigger signal to the
>> @@ -134,6 +149,17 @@ Example :
>> * arbiter will select the highest priority as the final throttle
>> * settings to skip cpu pulse.
>> */
>> +
>> + throttle_oc1: oc1 {
>> + nvidia,priority = <50>;
>> + nvidia,polarity-active-low = <1>;
>> + nvidia,count-threshold = <100>;
>> + nvidia,alarm-filter = <5100000>;
>> + nvidia,throttle-period = <0>;
>> + nvidia,cpu-throt-percent = <75>;
>> + nvidia,gpu-throt-level =
>> + <TEGRA_SOCTHERM_THROT_LEVEL_MED>;
>> + };
>> };
>> };
>>
>> --
>> 2.7.4
>>
