MT8183 samples on rising and falling edge. It can reduce half data
io.
MT8173 also has those registers. But the hw function is removed.
So MT8173 doesn't support DPI dual edge sample and can't use the
same setting to mt8183.
Signed-off-by: Jitao Shi <jitao.shi@xxxxxxxxxxxx>
---
drivers/gpu/drm/mediatek/mtk_dpi.c | 29 +++++++++++++++++++++++++++++
1 file changed, 29 insertions(+)
diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
index 62a9d47df948..610c23334047 100644
--- a/drivers/gpu/drm/mediatek/mtk_dpi.c
+++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
@@ -117,6 +117,7 @@ struct mtk_dpi_conf {
unsigned int (*cal_factor)(int clock);
u32 reg_h_fre_con;
bool edge_sel_en;
+ bool dual_edge;
};
static void mtk_dpi_mask(struct mtk_dpi *dpi, u32 offset, u32 val, u32 mask)
@@ -353,6 +354,13 @@ static void mtk_dpi_config_disable_edge(struct mtk_dpi *dpi)
mtk_dpi_mask(dpi, dpi->conf->reg_h_fre_con, 0, EDGE_SEL_EN);
}
+static void mtk_dpi_enable_dual_edge(struct mtk_dpi *dpi)
+{
+ mtk_dpi_mask(dpi, DPI_DDR_SETTING, DDR_EN | DDR_4PHASE,
+ DDR_EN | DDR_4PHASE);
+ mtk_dpi_mask(dpi, DPI_OUTPUT_SETTING, EDGE_SEL, EDGE_SEL);
+}
+
static void mtk_dpi_config_color_format(struct mtk_dpi *dpi,
enum mtk_dpi_out_color_format format)
{
@@ -509,6 +517,8 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
mtk_dpi_config_color_format(dpi, dpi->color_format);
mtk_dpi_config_2n_h_fre(dpi);
mtk_dpi_config_disable_edge(dpi);
+ if (dpi->conf->dual_edge)
+ mtk_dpi_enable_dual_edge(dpi);
mtk_dpi_sw_reset(dpi, false);
return 0;
@@ -671,6 +681,16 @@ static unsigned int mt2701_calculate_factor(int clock)
return 2;
}
+static unsigned int mt8183_calculate_factor(int clock)
+{
+ if (clock <= 27000)
+ return 8;
+ else if (clock <= 167000)
+ return 4;
+ else
+ return 2;
+}
+
static const struct mtk_dpi_conf mt8173_conf = {
.cal_factor = mt8173_calculate_factor,
.reg_h_fre_con = 0xe0,
@@ -682,6 +702,12 @@ static const struct mtk_dpi_conf mt2701_conf = {
.edge_sel_en = true,
};
+static const struct mtk_dpi_conf mt8183_conf = {
+ .cal_factor = mt8183_calculate_factor,
+ .reg_h_fre_con = 0xe0,
+ .dual_edge = true,
+};
+
static int mtk_dpi_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -777,6 +803,9 @@ static const struct of_device_id mtk_dpi_of_ids[] = {
{ .compatible = "mediatek,mt8173-dpi",
.data = &mt8173_conf,
},
+ { .compatible = "mediatek,mt8183-dpi",
+ .data = &mt8183_conf,
+ },
{ },
};
--
2.20.1
