Maintain naming consistency with what was landed for sdm845. Simplifies
parsing for test tools.
Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/msm8996.dtsi | 24 ++++++++++++------------
1 file changed, 12 insertions(+), 12 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 8e36a39e1386..67ab6e31b0e5 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -154,20 +154,20 @@
};
thermal-zones {
- cpu-thermal0 {
+ cpu0-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 3>;
trips {
- cpu_alert0: trip0 {
+ cpu0_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit0: trip1 {
+ cpu0_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
@@ -175,20 +175,20 @@
};
};
- cpu-thermal1 {
+ cpu1-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 5>;
trips {
- cpu_alert1: trip0 {
+ cpu1_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit1: trip1 {
+ cpu1_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
@@ -196,20 +196,20 @@
};
};
- cpu-thermal2 {
+ cpu2-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 8>;
trips {
- cpu_alert2: trip0 {
+ cpu2_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit2: trip1 {
+ cpu2_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
@@ -217,20 +217,20 @@
};
};
- cpu-thermal3 {
+ cpu3-thermal {
polling-delay-passive = <250>;
polling-delay = <1000>;
thermal-sensors = <&tsens0 10>;
trips {
- cpu_alert3: trip0 {
+ cpu3_alert0: trip-point@0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
};
- cpu_crit3: trip1 {
+ cpu3_crit: cpu_crit {
temperature = <110000>;
hysteresis = <2000>;
type = "critical";
--
2.17.1
