Hi Vasily.
On Thu, Feb 14, 2019 at 09:09:54PM -0800, Vasily Khoruzhick via dri-devel wrote:
> This commit adds support for the BOE HB140WX1-501 14" WXGA TFT LCD
> panel.
>
> Signed-off-by: Vasily Khoruzhick <anarsoul@xxxxxxxxx>
> ---
> .../display/panel/boe,hb140wx1-501.txt | 7 +++++
> drivers/gpu/drm/panel/panel-simple.c | 26 +++++++++++++++++++
> 2 files changed, 33 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/display/panel/boe,hb140wx1-501.txt
>
> diff --git a/Documentation/devicetree/bindings/display/panel/boe,hb140wx1-501.txt b/Documentation/devicetree/bindings/display/panel/boe,hb140wx1-501.txt
> new file mode 100644
> index 000000000000..fc6f085eb8d1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/boe,hb140wx1-501.txt
> @@ -0,0 +1,7 @@
> +BOE HB140WX1-501 14" WXGA (1366x768) TFT LCD panel
> +
> +Required properties:
> +- compatible: should be "boe,hb140wx1-501"
> +
> +This binding is compatible with the simple-panel binding, which is specified
> +in simple-panel.txt in this directory.
boe must be added to vendor-prefixes.txt
(It is not present in the file I checked, but I may have been added later)
It is usual practice to split the patch in a dt-bindings: patch and a driver patch.
And for the dt-bindings patch follow the submission rules laid out
in Documentation/devicetree/bindings/submitting-patches.txt
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index 9c69e739a524..9a4c9dd02c6c 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -828,6 +828,29 @@ static const struct panel_desc bananapi_s070wv20_ct16 = {
> },
> };
>
> +static const struct drm_display_mode boe_hb140wx1_mode = {
> + .clock = 72300,
> + .hdisplay = 1366,
> + .hsync_start = 1366 + 48,
> + .hsync_end = 1366 + 48 + 32,
> + .htotal = 1366 + 48 + 32 + 80,
> + .vdisplay = 768,
> + .vsync_start = 768 + 3,
> + .vsync_end = 768 + 3 + 6,
> + .vtotal = 768 + 3 + 6 + 13,
> + .vrefresh = 60,
> + .flags = DRM_MODE_FLAG_PHSYNC | DRM_MODE_FLAG_NVSYNC,
+1 for specifying .flags.
> +};
> +
> +static const struct panel_desc boe_hb140wx1 = {
> + .modes = &boe_hb140wx1_mode,
> + .num_modes = 1,
> + .size = {
> + .width = 310,
> + .height = 170,
> + },
> +};
No .bus_format and no .bus_flags specified.
Are they not used by this panel or are you lucky and the default works?
> +
> static const struct drm_display_mode boe_hv070wsa_mode = {
> .clock = 42105,
> .hdisplay = 1024,
> @@ -2541,6 +2564,9 @@ static const struct of_device_id platform_of_match[] = {
> }, {
> .compatible = "bananapi,s070wv20-ct16",
> .data = &bananapi_s070wv20_ct16,
> + }, {
> + .compatible = "boe,hb140wx1-501",
> + .data = &boe_hb140wx1
It is common practice to end the line with a "," so one do not need to modify
this line if an extra line is required.
With the comments addressed you can add my:
Reviewed-by: Sam Ravnborg <sam@xxxxxxxxxxxx>
