From: Chunyan Zhang <zhang.chunyan@xxxxxxxxxx>
sdhci-omap can support both external dma controller via dmaengine framework
as well as ADMA which standard SD host controller provides.
Fixes by Faiz Abbas <fazi_abbas@xxxxxx>:
1. Switch to DMA slave mode when using external DMA
2. Add offset to mapbase
Signed-off-by: Chunyan Zhang <zhang.chunyan@xxxxxxxxxx>
Signed-off-by: Faiz Abbas <faiz_abbas@xxxxxx>
---
drivers/mmc/host/Kconfig | 1 +
drivers/mmc/host/sdhci-omap.c | 16 +++++++++++++++-
2 files changed, 16 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
index f3b442528ed8..5d1189478ee0 100644
--- a/drivers/mmc/host/Kconfig
+++ b/drivers/mmc/host/Kconfig
@@ -979,6 +979,7 @@ config MMC_SDHCI_OMAP
depends on MMC_SDHCI_PLTFM && OF
select THERMAL
imply TI_SOC_THERMAL
+ select MMC_SDHCI_EXTERNAL_DMA if DMA_ENGINE
help
This selects the Secure Digital Host Controller Interface (SDHCI)
support present in TI's DRA7 SOCs. The controller supports
diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
index c11c18a9aacb..8a05e94fe612 100644
--- a/drivers/mmc/host/sdhci-omap.c
+++ b/drivers/mmc/host/sdhci-omap.c
@@ -696,7 +696,11 @@ static int sdhci_omap_enable_dma(struct sdhci_host *host)
struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host);
reg = sdhci_omap_readl(omap_host, SDHCI_OMAP_CON);
- reg |= CON_DMA_MASTER;
+ reg &= ~CON_DMA_MASTER;
+ /* Switch to DMA slave mode when using external DMA */
+ if (!host->use_external_dma)
+ reg |= CON_DMA_MASTER;
+
sdhci_omap_writel(omap_host, SDHCI_OMAP_CON, reg);
return 0;
@@ -1010,6 +1014,7 @@ static int sdhci_omap_probe(struct platform_device *pdev)
const struct of_device_id *match;
struct sdhci_omap_data *data;
const struct soc_device_attribute *soc;
+ struct resource *regs;
match = of_match_device(omap_sdhci_match, dev);
if (!match)
@@ -1022,6 +1027,10 @@ static int sdhci_omap_probe(struct platform_device *pdev)
}
offset = data->offset;
+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!regs)
+ return -ENXIO;
+
host = sdhci_pltfm_init(pdev, &sdhci_omap_pdata,
sizeof(*omap_host));
if (IS_ERR(host)) {
@@ -1038,6 +1047,7 @@ static int sdhci_omap_probe(struct platform_device *pdev)
omap_host->timing = MMC_TIMING_LEGACY;
omap_host->flags = data->flags;
host->ioaddr += offset;
+ host->mapbase = regs->start + offset;
mmc = host->mmc;
sdhci_get_of_property(pdev);
@@ -1105,6 +1115,10 @@ static int sdhci_omap_probe(struct platform_device *pdev)
host->mmc_host_ops.execute_tuning = sdhci_omap_execute_tuning;
host->mmc_host_ops.enable_sdio_irq = sdhci_omap_enable_sdio_irq;
+ /* Switch to external DMA only if there is the "dmas" property */
+ if (of_find_property(dev->of_node, "dmas", NULL))
+ sdhci_switch_external_dma(host, true);
+
ret = sdhci_setup_host(host);
if (ret)
goto err_put_sync;
--
2.19.2
