Am Mittwoch, 13. Februar 2019, 18:06:39 CET schrieb Akash Gajjar:
> rename white and red LEDs with status and heartbeat respectively.
> replace red LED default state off with default-trigger heartbeat.
>
> Signed-off-by: Akash Gajjar <Akash_Gajjar@xxxxxxxxxx>
Hmm, in the schematics the leds are named work + diy as in the current
devicetree, so I'd like to keep node names + pinctrl matching schematics
please.
And changing the functionality of the LEDs would require a bit more
rationale in the commit message on why that is something we want.
Heiko
> ---
> .../arm64/boot/dts/rockchip/rk3399-rockpro64.dts | 16 ++++++++--------
> 1 file changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
> b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts index
> c9a2b26d7cad..dab53d2eb676 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dts
> @@ -43,17 +43,17 @@
> leds {
> compatible = "gpio-leds";
> pinctrl-names = "default";
> - pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>;
> + pinctrl-0 = <&status_led_gpio>, <&heartbeat_led_gpio>;
>
> - work-led {
> - label = "work";
> + status-led {
> + label = "rockpro64:white:status";
> default-state = "on";
> gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>;
> };
>
> - diy-led {
> - label = "diy";
> - default-state = "off";
> + heartbeat-led {
> + label = "rockpor64:red:heartbeat";
> + linux,default-trigger = "heartbeat";
> gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
> };
> };
> @@ -502,11 +502,11 @@
> };
>
> leds {
> - work_led_gpio: work_led-gpio {
> + status_led_gpio: status-led-gpio {
> rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
> };
>
> - diy_led_gpio: diy_led-gpio {
> + heartbeat_led_gpio: heartbeat-led-gpio {
> rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
> };
> };
