Hi, Viresh Best Regards! Anson Huang > -----Original Message----- > From: Viresh Kumar [mailto:viresh.kumar@xxxxxxxxxx] > Sent: 2019年2月14日 16:34 > To: Anson Huang <anson.huang@xxxxxxx> > Cc: robh+dt@xxxxxxxxxx; mark.rutland@xxxxxxx; shawnguo@xxxxxxxxxx; > s.hauer@xxxxxxxxxxxxxx; kernel@xxxxxxxxxxxxxx; festevam@xxxxxxxxx; > mturquette@xxxxxxxxxxxx; sboyd@xxxxxxxxxx; Aisheng Dong > <aisheng.dong@xxxxxxx>; Daniel Baluta <daniel.baluta@xxxxxxx>; > devicetree@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; linux- > kernel@xxxxxxxxxxxxxxx; linux-clk@xxxxxxxxxxxxxxx; dl-linux-imx <linux- > imx@xxxxxxx> > Subject: Re: [PATCH V5 1/2] arm64: dts: freescale: imx8qxp: add cpu opp > table > > On 14-02-19, 08:02, Anson Huang wrote: > > Add i.MX8QXP CPU opp table to support cpufreq. > > > > Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx> > > --- > > Changes since V4: > > - remove redundant clock-latency property in A35_0; > > - add #cooling-cells for all A35 core. > > --- > > arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 27 > > +++++++++++++++++++++++++++ > > 1 file changed, 27 insertions(+) > > > > diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi > > b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi > > index 4021f25..fad1259 100644 > > --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi > > +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi > > @@ -34,6 +34,9 @@ > > reg = <0x0 0x0>; > > enable-method = "psci"; > > next-level-cache = <&A35_L2>; > > + clocks = <&clk IMX_A35_CLK>; > > As I said in my previous email, mentioning clocks is important too for other > CPUs. Although all CPUs share same clock and opp table, but OK, I will add clock to all CPUs. Anson. > > > + operating-points-v2 = <&a35_0_opp_table>; > > + #cooling-cells = <2>; > > }; > > > > A35_1: cpu@1 { > > @@ -42,6 +45,8 @@ > > reg = <0x0 0x1>; > > enable-method = "psci"; > > next-level-cache = <&A35_L2>; > > + operating-points-v2 = <&a35_0_opp_table>; > > + #cooling-cells = <2>; > > }; > > > > A35_2: cpu@2 { > > @@ -50,6 +55,8 @@ > > reg = <0x0 0x2>; > > enable-method = "psci"; > > next-level-cache = <&A35_L2>; > > + operating-points-v2 = <&a35_0_opp_table>; > > + #cooling-cells = <2>; > > }; > > > > A35_3: cpu@3 { > > @@ -58,6 +65,8 @@ > > reg = <0x0 0x3>; > > enable-method = "psci"; > > next-level-cache = <&A35_L2>; > > + operating-points-v2 = <&a35_0_opp_table>; > > + #cooling-cells = <2>; > > }; > > > > A35_L2: l2-cache0 { > > @@ -65,6 +74,24 @@ > > }; > > }; > > > > + a35_0_opp_table: opp-table { > > + compatible = "operating-points-v2"; > > + opp-shared; > > + > > + opp-900000000 { > > + opp-hz = /bits/ 64 <900000000>; > > + opp-microvolt = <1000000>; > > + clock-latency-ns = <150000>; > > + }; > > + > > + opp-1200000000 { > > + opp-hz = /bits/ 64 <1200000000>; > > + opp-microvolt = <1100000>; > > + clock-latency-ns = <150000>; > > + opp-suspend; > > + }; > > + }; > > + > > gic: interrupt-controller@51a00000 { > > compatible = "arm,gic-v3"; > > reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */ > > -- > > 2.7.4 > > -- > viresh
