On Thu, Feb 14, 2019 at 12:43 PM Jitao Shi <jitao.shi@xxxxxxxxxxxx> wrote:
>
> MT8183 dsi has two changes with mt8173.
> 1. Add the register double buffer control, but we no need it, So make
> it default off.
Can you describe a little bit more what this is about? That's shadow
registers, right?
> 2. Add picture size control.
>
> Signed-off-by: Jitao Shi <jitao.shi@xxxxxxxxxxxx>
> ---
> drivers/gpu/drm/mediatek/mtk_dsi.c | 20 +++++++++++++++++++-
> 1 file changed, 19 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dsi.c b/drivers/gpu/drm/mediatek/mtk_dsi.c
> index 80db02a25cb0..20cb53f05d42 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dsi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dsi.c
> @@ -78,6 +78,7 @@
> #define DSI_VBP_NL 0x24
> #define DSI_VFP_NL 0x28
> #define DSI_VACT_NL 0x2C
> +#define DSI_SIZE_CON 0x38
> #define DSI_HSA_WC 0x50
> #define DSI_HBP_WC 0x54
> #define DSI_HFP_WC 0x58
> @@ -131,7 +132,10 @@
> #define VM_CMD_EN BIT(0)
> #define TS_VFP_EN BIT(5)
>
> -#define DSI_CMDQ0 0x180
As I said earlier, move this to 2/3.
> +#define DSI_SHADOW_DEBUG 0x190U
> +#define FORCE_COMMIT BIT(0)
> +#define BYPASS_SHADOW BIT(1)
> +
> #define CONFIG (0xff << 0)
> #define SHORT_PACKET 0
> #define LONG_PACKET 2
> @@ -158,6 +162,7 @@ struct phy;
>
> struct mtk_dsi_driver_data {
> const u32 reg_cmdq_off;
> + bool has_size_ctl;
> };
>
> struct mtk_dsi {
> @@ -426,6 +431,9 @@ static void mtk_dsi_config_vdo_timing(struct mtk_dsi *dsi)
> writel(vm->vfront_porch, dsi->regs + DSI_VFP_NL);
> writel(vm->vactive, dsi->regs + DSI_VACT_NL);
>
> + if (dsi->driver_data->has_size_ctl)
> + writel(vm->vactive << 16 | vm->hactive, dsi->regs + DSI_SIZE_CON);
> +
> horizontal_sync_active_byte = (vm->hsync_len * dsi_tmp_buf_bpp - 10);
>
> if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)
> @@ -595,6 +603,9 @@ static int mtk_dsi_poweron(struct mtk_dsi *dsi)
> }
>
> mtk_dsi_enable(dsi);
> +
> + /* DSI no need this double buffer, disable it when writing register */
"DSI does not need double buffering, disable it when writing register"
> + writel(FORCE_COMMIT | BYPASS_SHADOW, dsi->regs + DSI_SHADOW_DEBUG);
So you do this on all MT* variants, is that ok?
> mtk_dsi_reset_engine(dsi);
> mtk_dsi_phy_timconfig(dsi);
>
> @@ -1090,11 +1101,18 @@ static const struct mtk_dsi_driver_data mt2701_dsi_driver_data = {
> .reg_cmdq_off = 0x180,
> };
>
> +static const struct mtk_dsi_driver_data mt8183_dsi_driver_data = {
> + .reg_cmdq_off = 0x200,
> + .has_size_ctl = true,
> +};
> +
> static const struct of_device_id mtk_dsi_of_match[] = {
> { .compatible = "mediatek,mt2701-dsi",
> .data = &mt2701_dsi_driver_data },
> { .compatible = "mediatek,mt8173-dsi",
> .data = &mt8173_dsi_driver_data },
> + { .compatible = "mediatek,mt8183-dsi",
> + .data = &mt8183_dsi_driver_data },
> { },
> };
>
> --
> 2.20.1
>
