I just update the patch series and also add RTC alarm support to use i.MX SCU general interrupt as an example, because RTC alarm patch depends on it, so I sent them together in ONE path series, please just help review the V2 patch series, thanks.
Best Regards!
Anson Huang
> -----Original Message-----
> From: Anson Huang
> Sent: 2019年2月12日 20:39
> To: robh+dt@xxxxxxxxxx; mark.rutland@xxxxxxx; shawnguo@xxxxxxxxxx;
> s.hauer@xxxxxxxxxxxxxx; kernel@xxxxxxxxxxxxxx; festevam@xxxxxxxxx;
> Aisheng Dong <aisheng.dong@xxxxxxx>; ulf.hansson@xxxxxxxxxx; Daniel
> Baluta <daniel.baluta@xxxxxxx>; devicetree@xxxxxxxxxxxxxxx; linux-
> kernel@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> Cc: dl-linux-imx <linux-imx@xxxxxxx>
> Subject: RE: [PATCH 1/3] dt-bindings: fsl: scu: add general interrupt support
>
> Gentle ping...
>
> Best Regards!
> Anson Huang
>
> > -----Original Message-----
> > From: Anson Huang
> > Sent: 2019年1月23日 16:01
> > To: robh+dt@xxxxxxxxxx; mark.rutland@xxxxxxx; shawnguo@xxxxxxxxxx;
> > s.hauer@xxxxxxxxxxxxxx; kernel@xxxxxxxxxxxxxx; festevam@xxxxxxxxx;
> > Aisheng Dong <aisheng.dong@xxxxxxx>; ulf.hansson@xxxxxxxxxx; Daniel
> > Baluta <daniel.baluta@xxxxxxx>; devicetree@xxxxxxxxxxxxxxx; linux-
> > kernel@xxxxxxxxxxxxxxx; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> > Cc: dl-linux-imx <linux-imx@xxxxxxx>
> > Subject: [PATCH 1/3] dt-bindings: fsl: scu: add general interrupt
> > support
> >
> > Add scu general interrupt function support.
> >
> > Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
> > ---
> > .../devicetree/bindings/arm/freescale/fsl,scu.txt | 18 ++++++++++++-----
> -
> > 1 file changed, 12 insertions(+), 6 deletions(-)
> >
> > diff --git
> > a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> > b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> > index fd2bed2..3c976ac 100644
> > --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> > +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> > @@ -22,9 +22,11 @@ Required properties:
> > -------------------
> > - compatible: should be "fsl,imx-scu".
> > - mbox-names: should include "tx0", "tx1", "tx2", "tx3",
> > - "rx0", "rx1", "rx2", "rx3".
> > -- mboxes: List of phandle of 4 MU channels for tx and 4 MU channels
> > - for rx. All 8 MU channels must be in the same MU instance.
> > + "rx0", "rx1", "rx2", "rx3",
> > + "gi3".
> > +- mboxes: List of phandle of 4 MU channels for tx, 4 MU channels for
> > + rx, and 1 MU channel for general interrupt. All 9 MU channels
> > + must be in the same MU instance.
> > Cross instances are not allowed. The MU instance can only
> > be one of LSIO MU0~M4 for imx8qxp and imx8qm. Users
> need
> > to make sure use the one which is not conflict with other @@
> > -34,6 +36,7 @@ Required properties:
> > Channel 1 must be "tx1" or "rx1".
> > Channel 2 must be "tx2" or "rx2".
> > Channel 3 must be "tx3" or "rx3".
> > + General interrupt channel must be "gi3".
> > e.g.
> > mboxes = <&lsio_mu1 0 0
> > &lsio_mu1 0 1
> > @@ -42,7 +45,8 @@ Required properties:
> > &lsio_mu1 1 0
> > &lsio_mu1 1 1
> > &lsio_mu1 1 2
> > - &lsio_mu1 1 3>;
> > + &lsio_mu1 1 3
> > + &lsio_mu1 3 3>;
> > See Documentation/devicetree/bindings/mailbox/fsl,mu.txt
> > for detailed mailbox binding.
> >
> > @@ -130,7 +134,8 @@ firmware {
> > scu {
> > compatible = "fsl,imx-scu";
> > mbox-names = "tx0", "tx1", "tx2", "tx3",
> > - "rx0", "rx1", "rx2", "rx3";
> > + "rx0", "rx1", "rx2", "rx3",
> > + "gi3";
> > mboxes = <&lsio_mu1 0 0
> > &lsio_mu1 0 1
> > &lsio_mu1 0 2
> > @@ -138,7 +143,8 @@ firmware {
> > &lsio_mu1 1 0
> > &lsio_mu1 1 1
> > &lsio_mu1 1 2
> > - &lsio_mu1 1 3>;
> > + &lsio_mu1 1 3
> > + &lsio_mu1 3 3>;
> >
> > clk: clk {
> > compatible = "fsl,imx8qxp-clk";
> > --
> > 2.7.4
