This patch series adds i.MX SCU general interrupt support, the SCU general interrupt supports RTC alarm, wdog, thermal alarm etc., e.g. RTC alarm irq is controlled by system controller and when RTC alarm fires, system controller will general SCU MU general interrupt rather than RTC IRQ, so need to use notification for RTC driver to handle the alarm event. RTC alarm function patch depends on i.MX SCU general interrupt support, so put it into same series for review. Anson Huang (4): dt-bindings: fsl: scu: add general interrupt support firmware: imx: enable imx scu general irq function arm64: dts: freescale: imx8qxp: enable scu general irq channel rtc: imx-sc: add rtc alarm support .../devicetree/bindings/arm/freescale/fsl,scu.txt | 18 ++-- arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 6 +- drivers/firmware/imx/imx-scu.c | 101 +++++++++++++++++++++ drivers/rtc/rtc-imx-sc.c | 100 ++++++++++++++++++++ include/linux/firmware/imx/sci.h | 3 + 5 files changed, 220 insertions(+), 8 deletions(-) -- 2.7.4
