Re: [PATCH v2 04/14] irqchip: pruss: Add a PRUSS irqchip driver for PRUSS interrupts

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2/5/19 5:04 AM, Marc Zyngier wrote:
> On Tue, 05 Feb 2019 10:35:44 +0000,
> Roger Quadros <rogerq@xxxxxx> wrote:
>>
>> On 04/02/19 20:15, Tony Lindgren wrote:
>>> * Roger Quadros <rogerq@xxxxxx> [190204 14:23]:
>>>> From: "Andrew F. Davis" <afd@xxxxxx>
>>>>
>>>> The Programmable Real-Time Unit Subsystem (PRUSS) contains an
>>>> interrupt controller (INTC) that can handle various system input
>>>> events and post interrupts back to the device-level initiators.
>>>> The INTC can support upto 64 input events with individual control
>>>> configuration and hardware prioritization. These events are mapped
>>>> onto 10 interrupt signals through two levels of many-to-one mapping
>>>> support. Different interrupt signals are routed to the individual
>>>> PRU cores or to the host CPU.
>>>>
>>>> The PRUSS INTC platform driver manages this PRUSS interrupt
>>>> controller and implements an irqchip driver to provide a Linux
>>>> standard way for the PRU client users to enable/disable/ack/
>>>> re-trigger a PRUSS system event. The system events to interrupt
>>>> channels and host interrupts relies on the mapping configuration
>>>> provided through a firmware resource table for now. This will be
>>>> revisited and enhanced in the future for a better interface. The
>>>> mappings will currently be programmed during the boot/shutdown
>>>> of the PRU.
>>>>
>>>> The PRUSS INTC module is reference counted during the interrupt
>>>> setup phase through the irqchip's irq_request_resources() and
>>>> irq_release_resources() ops. This restricts the module from being
>>>> removed as long as there are active interrupt users.
>>>>
>>>> The PRUSS INTC can generate an interrupt to various processor
>>>> subsystems on the SoC through a set of 64 possible PRU system
>>>> events. These system events can be used by PRU client drivers
>>>> or applications for event notifications/signalling between PRUs
>>>> and MPU or other processors. An API, pruss_intc_trigger() is
>>>> provided to MPU-side PRU client drivers/applications to be able
>>>> to trigger an event/interrupt using IRQ numbers provided by the
>>>> PRUSS-INTC irqdomain chip.
>>>
>>> I suggest you send the binding patch and the interrupt
>>> controller driver separately to the irqchip guys. Maybe
>>> put the trigger function in to a separate patch that can
>>> be reviewed and applied separately.
>>
>> Good idea. I will send irqchip related patches separately.
> 
> Yes please. But also please document why you have so many non
> irq-related entry points in this irqchip driver. It seems to replicate
> the same "events vs irq" stuff we're trying to get rid of in the K3
> patches...

This is not the same, the whole INTC is a sub-module within the
sub-system serving interrupts to both the PRUs and the main host
processor. In anycase, we can add more details when we send out the
series separately.

regards
Suman



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux