On Fri, Feb 1, 2019 at 9:12 PM Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx> wrote: > > Here is next version changes for Allwinner A64 MIPI-DSI support > > This series grouped the changes like previous version[1] with different > sets to support three different panels types that can fit into the DSI > controller. > > set:1, for 4-lane, burst mode support > - patch 0001: 0009, DSI controller changes that support burst mode. > > set:2, for A64 DSI support > - patch 0010: tcon dclk divider computation based on A64 BSP. > - patch 0011: 0017, Allwinner A64 DSI controller changes. > > set:3, enable 4-lane burst mode panel: > - patch 0018: Overlay patch that enable Feiyang FY07024DI26A30-D > burst mode panel on Pine64-LTS > > set:4, enable 4-lane video mode panel: > - patch 0019: msg type MIPI_DSI_GENERIC_SHORT_WRITE_2_PARAM support > - patch 0020: Overlay patch that enable Bananapi S070WV20-CT16 ICN6211 > panel on Bananapi M64 > > set:5, enable 2-lane video mode panel: > - patch 0021, 0022: DSI hfp and hbp timings fixes > - patch 0023: Enable Techstar TS8550B panel on Amarula A64-Relic > > Changes for v7: > - moved vcc-dsi binding to required filed. > - drop quotes on fallback dphy bindings. > - drop min_rate clock pll-mipi patches. > - introduce dclk divider computation as like A64 BSP. > - add A64 DSI quark patches. > - fixed A64 DSI pipeline. > - add proper commit messages. > - collect Merlijn Wajer Tested-by credits. > Changes for v6: > - dropped unneeded changes, patches > - fixed all burst mode patches as per previous version comments > - rebase on master > - update proper commit message > - dropped unneeded comments > - order the patches that make review easy > Changes for v5: > - collect Rob, Acked-by > - droped "Fix VBP size calculation" patch > - updated vblk timing calculation. > - droped techstar, bananapi dsi panel drivers which may require > bridge or other setup. it's under discussion. > Changes for v4: > - droppoed untested CCU_FEATURE_FIXED_POSTDIV check code in > nkm min, max rate patches > - create two patches for "Add Allwinner A64 MIPI DSI support" > one for has_mod_clk quirk and other one for A64 support > - use existing driver code construct for hblk computation > - dropped "Increase hfp packet overhead" patch [2], though BSP added > this but we have no issues as of now. > (no issues on panel side w/o this change) > - create separate function for vblk computation > - enable vcc-dsi regulator in dsi_runtime_resume > - collect Rob, Acked-by > - update MAINTAINERS file for panel drivers > - cleanup commit messages > - fixed checkpatch warnings/errors > > [1] https://patchwork.kernel.org/cover/10779893/ > > Any inputs? > Jagan. > > Jagan Teki (23): > drm/sun4i: sun6i_mipi_dsi: Compute burst mode loop N1 instruction > delay > drm/sun4i: sun6i_mipi_dsi: Support instruction loop selection > drm/sun4i: sun6i_mipi_dsi: Setup burst mode timings > drm/sun4i: sun6i_mipi_dsi: Simplify drq to support all modes > drm/sun4i: tcon: Export get tcon0 routine > drm/sun4i: sun6i_mipi_dsi: Probe tcon0 during dsi_bind > drm/sun4i: sun6i_mipi_dsi: Setup burst mode > drm/sun4i: sun6i_mipi_dsi: Enable trail_inv and trail_fill controls > drm/sun4i: sun6i_mipi_dsi: Enable HBP, HSA_HSE for burst mode Can you pick these burst changes which are generic to all SoCs. and reset will send once we decide the tcon clock.
