Mark Rutland <mark.rutland@xxxxxxx> wrote:
> > +Example:
> > +
> > + aliases {
> > + ethernet0 = <&sxgbe0>;
> > + };
> > +
> > + sxgbe0: ethernet@1a040000 {
> > + compatible = "samsung,sxgbe-v2.0a";
> > + reg = <0 0x1a040000 0 0x10000>;
> > + interrupt-parent = <&gic>;
> > + interrupts = <0 209 4>, <0 185 4>, <0 186 4>, <0 187 4>,
> > + <0 188 4>, <0 189 4>, <0 190 4>, <0 191 4>,
> > + <0 192 4>, <0 193 4>, <0 194 4>, <0 195 4>,
> > + <0 196 4>, <0 197 4>, <0 198 4>, <0 199 4>,
> > + <0 200 4>, <0 201 4>, <0 202 4>, <0 203 4>,
> > + <0 204 4>, <0 205 4>, <0 206 4>, <0 207 4>,
> > + <0 208 4>, <0 210 4>;
> > + samsung,pbl = <0x08>
> > + samsung,burst-map = <0x20>
> > + samsung,adv-addr-mode = "true"
> > + samsung,force-sf-dma-mode = "true"
>
> You don't need these strings for boolean properties. Their presence of the
> property alone (even in the absende of a value) is sufficient. These should
> simply be:
>
> samsung,adv-addr-map;
> samsung,force-sf-dma-mode;
OK. It looks better
>
> It is still an open question as to whether these properties are necessary.
I understood, actually those two properties are for future.
"samsung,adv-addr-map" is needed for more than 32 bit addressing and
"force-sf-dma-mode" to use full dma fifo.
As of now these are not mandatory property.
These will be added later, I'll remove it this patch series.
>
> Cheers,
> Mark.
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in the
body of
> a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at
> http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
