From: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx> Add documentation for slew rate. Signed-off-by: Claudiu Beznea <claudiu.beznea@xxxxxxxxxxxxx> Acked-by: Ludovic Desroches <ludovic.desroches@xxxxxxxxxxxxx> --- Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt index c2d51ed86d47..19c255346a49 100644 --- a/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt @@ -100,6 +100,7 @@ DRIVE_STRENGTH (3 << 5): indicate the drive strength of the pin using the 11 - High OUTPUT (1 << 7): indicate this pin need to be configured as an output. OUTPUT_VAL (1 << 8): output val (1 = high, 0 = low) +SLEWRATE (1 << 9): slew rate of the pin: 0 = disable, 1 = enable DEBOUNCE (1 << 16): indicate this pin needs debounce. DEBOUNCE_VAL (0x3fff << 17): debounce value. -- 2.7.4
