[PATCH net-next 0/6] Add comphy support for Armada 38x

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

This series adds support for the comphy for Armada 38x, which allows
these SoCs to use 2500BASE-X mode with appropriate SFP modules.

Tested on SolidRun Clearfog.

 .../bindings/net/marvell-armada-370-neta.txt       |   2 +-
 .../bindings/phy/phy-armada38x-comphy.txt          |  40 ++++
 arch/arm/boot/dts/armada-388-clearfog.dtsi         |   2 +
 arch/arm/boot/dts/armada-38x.dtsi                  |  37 ++++
 drivers/net/ethernet/marvell/mvneta.c              |  57 ++++-
 drivers/phy/marvell/Kconfig                        |  10 +
 drivers/phy/marvell/Makefile                       |   1 +
 drivers/phy/marvell/phy-armada38x-comphy.c         | 232 +++++++++++++++++++++
 8 files changed, 376 insertions(+), 5 deletions(-)

-- 
RMK's Patch system: https://www.armlinux.org.uk/developer/patches/
FTTC broadband for 0.8mile line in suburbia: sync at 12.1Mbps down 622kbps up
According to speedtest.net: 11.9Mbps down 500kbps up



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux