Re: [PATCH 2/4] pwm: stm32-lp: Add power management support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2/5/19 7:30 PM, Tomasz Duszynski wrote:
> On Tue, Feb 05, 2019 at 01:40:27PM +0100, Fabrice Gasnier wrote:
>> Add suspend/resume PM sleep ops. When going to low power, disable
>> active PWM channel. Active PWM channel is resumed, by calling
>> pwm_apply_state(). This is inspired by Thierry's comment in [1].
>> Don't touch inactive channels, as it may be used by other LPTimer MFD
>> child driver.
>> [1]https://lkml.org/lkml/2017/12/5/175
>>
>> Signed-off-by: Fabrice Gasnier <fabrice.gasnier@xxxxxx>
>> ---
>>  drivers/pwm/pwm-stm32-lp.c | 38 ++++++++++++++++++++++++++++++++++++++
>>  1 file changed, 38 insertions(+)
>>
>> diff --git a/drivers/pwm/pwm-stm32-lp.c b/drivers/pwm/pwm-stm32-lp.c
>> index 0059b24c..0c40d48 100644
>> --- a/drivers/pwm/pwm-stm32-lp.c
>> +++ b/drivers/pwm/pwm-stm32-lp.c
>> @@ -13,6 +13,7 @@
>>  #include <linux/mfd/stm32-lptimer.h>
>>  #include <linux/module.h>
>>  #include <linux/of.h>
>> +#include <linux/pinctrl/consumer.h>
>>  #include <linux/platform_device.h>
>>  #include <linux/pwm.h>
>>
>> @@ -20,6 +21,8 @@ struct stm32_pwm_lp {
>>  	struct pwm_chip chip;
>>  	struct clk *clk;
>>  	struct regmap *regmap;
>> +	struct pwm_state suspend;
>> +	bool suspended;
>>  };
>>
>>  static inline struct stm32_pwm_lp *to_stm32_pwm_lp(struct pwm_chip *chip)
>> @@ -223,6 +226,40 @@ static int stm32_pwm_lp_remove(struct platform_device *pdev)
>>  	return pwmchip_remove(&priv->chip);
>>  }
>>
>> +#ifdef CONFIG_PM_SLEEP
> 
> You might consider dropping ifdefs and marking pm functions with
> __maybe_unused instead. In case CONFIG_PM_SLEEP=n then these two guys
> will be removed and pm ops structure will be empty.

Hi Tomasz,

Thanks for this suggestion. I can do this change. I'll wait for more
feedback from Uwe and Thierry before sending a v2 with that.

> 
>> +static int stm32_pwm_lp_suspend(struct device *dev)
>> +{
>> +	struct stm32_pwm_lp *priv = dev_get_drvdata(dev);
>> +
> 
> I guess you first need to get platform_device from dev and eventually
> stm32_pwm_lp. Wondering how this works now.

This should be safe for now. This works because the probe routine calls:
	platform_set_drvdata(pdev, priv);

And the underlying call is dev_set_drvdata()
static inline void platform_set_drvdata(struct platform_device *pdev,
					void *data)
{
	dev_set_drvdata(&pdev->dev, data);
}

> 
>> +	pwm_get_state(&priv->chip.pwms[0], &priv->suspend);
>> +	priv->suspended = priv->suspend.enabled;
>> +
>> +	/* safe to call pwm_disable() for already disabled pwm */
>> +	pwm_disable(&priv->chip.pwms[0]);
>> +
>> +	return pinctrl_pm_select_sleep_state(dev);
>> +}
>> +
>> +static int stm32_pwm_lp_resume(struct device *dev)
>> +{
>> +	struct stm32_pwm_lp *priv = dev_get_drvdata(dev);
>> +	int ret;
>> +
>> +	ret = pinctrl_pm_select_default_state(dev);
>> +	if (ret)
>> +		return ret;
>> +
>> +	/* Only restore suspended pwm, not to disrupt other MFD child */
>> +	if (!priv->suspended)
>> +		return 0;
> 
> Would it make sense to use suspend.enabled directly?

I propose to keep priv->suspended. Using 'suspend.enabled' directly
would simply not work as the pwm_disable() call in
stm32_pwm_lp_suspend() routine marks the 'suspend' state.enabled = false.
That's why it's saved in the suspend routine, to be restored upon resume.

Thanks for reviewing,
Best regards,
Fabrice

> 
>> +
>> +	return pwm_apply_state(&priv->chip.pwms[0], &priv->suspend);
>> +}
>> +#endif
>> +
>> +static SIMPLE_DEV_PM_OPS(stm32_pwm_lp_pm_ops, stm32_pwm_lp_suspend,
>> +			 stm32_pwm_lp_resume);
>> +
>>  static const struct of_device_id stm32_pwm_lp_of_match[] = {
>>  	{ .compatible = "st,stm32-pwm-lp", },
>>  	{},
>> @@ -235,6 +272,7 @@ static int stm32_pwm_lp_remove(struct platform_device *pdev)
>>  	.driver	= {
>>  		.name = "stm32-pwm-lp",
>>  		.of_match_table = of_match_ptr(stm32_pwm_lp_of_match),
>> +		.pm = &stm32_pwm_lp_pm_ops,
>>  	},
>>  };
>>  module_platform_driver(stm32_pwm_lp_driver);
>> --
>> 1.9.1
>>



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux