On 20/03/2014 21:39, Sebastian Hesselbarth wrote:
This adds scu and general purpose registers device nodes required for SMP on Berlin BG2 and BG2Q SoCs. The secondary CPUs will pick their jump address from general purpose (SW generic) register 1. Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
Acked-by: Antoine Ténart <antoine.tenart@xxxxxxxxxxxxxxxxxx> Also tested on the BG2Q, Tested-by: Antoine Ténart <antoine.tenart@xxxxxxxxxxxxxxxxxx>
--- Cc: Rob Herring <robh+dt@xxxxxxxxxx> Cc: Pawel Moll <pawel.moll@xxxxxxx> Cc: Mark Rutland <mark.rutland@xxxxxxx> Cc: Ian Campbell <ijc+devicetree@xxxxxxxxxxxxxx> Cc: Kumar Gala <galak@xxxxxxxxxxxxxx> Cc: Russell King <linux@xxxxxxxxxxxxxxxx> Cc: Antoine Tenart <antoine.tenart@xxxxxxxxxxxxxxxxxx> Cc: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxxxxxxxxx> Cc: devicetree@xxxxxxxxxxxxxxx Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx Cc: linux-kernel@xxxxxxxxxxxxxxx --- arch/arm/boot/dts/berlin2.dtsi | 10 ++++++++++ arch/arm/boot/dts/berlin2q.dtsi | 10 ++++++++++ 2 files changed, 20 insertions(+) diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi index 56a1af2f1052..4d85312dc17a 100644 --- a/arch/arm/boot/dts/berlin2.dtsi +++ b/arch/arm/boot/dts/berlin2.dtsi @@ -72,6 +72,11 @@ cache-level = <2>; }; + scu: snoop-control-unit@ad0000 { + compatible = "arm,cortex-a9-scu"; + reg = <0xad0000 0x58>; + }; + gic: interrupt-controller@ad1000 { compatible = "arm,cortex-a9-gic"; reg = <0xad1000 0x1000>, <0xad0100 0x0100>; @@ -176,6 +181,11 @@ }; }; + generic-regs@ea0184 { + compatible = "marvell,berlin-generic-regs", "syscon"; + reg = <0xea0184 0x10>; + }; + apb@fc0000 { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index 07452a7483fa..86d8a2c49f38 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -87,6 +87,11 @@ cache-level = <2>; }; + scu: snoop-control-unit@ad0000 { + compatible = "arm,cortex-a9-scu"; + reg = <0xad0000 0x58>; + }; + local-timer@ad0600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0xad0600 0x20>; @@ -183,6 +188,11 @@ }; }; + generic-regs@ea0110 { + compatible = "marvell,berlin-generic-regs", "syscon"; + reg = <0xea0110 0x10>; + }; + apb@fc0000 { compatible = "simple-bus"; #address-cells = <1>;
-- Antoine Ténart, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html