Hi, This series adds PRU-ICSS support for AM57xx IDK. PRU-ICSS is not present only on AM57xx SoCs so the PRUSS nodes are left disabled in dra7.dtsi. The board that uses a AM57xx SoC will have to enable them if required. PRU-ICSS has a SYSC register but it requires custom handling. So we add a new "ti,sysc-pruss" type to the ti-sysc bus driver. This series depends on [1] - PRU ICSS support v2 https://lkml.org/lkml/2019/2/4/677 cheers, -roger Roger Quadros (2): dt-binding: bus: ti-sysc: Add support for PRUSS SYSC type bus: ti-sysc: Add support for PRUSS SYSC type Suman Anna (2): ARM: dts: dra7: add PRU-ICSS modules ARM: dts: am57xx-idk-common: Enable PRU-ICSS nodes Documentation/devicetree/bindings/bus/ti-sysc.txt | 1 + arch/arm/boot/dts/am57xx-idk-common.dtsi | 8 + arch/arm/boot/dts/dra7.dtsi | 194 ++++++++++++++++++++++ drivers/bus/ti-sysc.c | 77 +++++++++ include/linux/platform_data/ti-sysc.h | 1 + 5 files changed, 281 insertions(+) -- Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
