Re: [PATCH 1/2] drm/omap: panel-tpo-td028ttec1: add backlight support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 19/01/2019 20:21, Andreas Kemnade wrote:
> This panel has a backlight, so fetch it from devicetree using the
> as documented in panel-common.txt. It is implemented the same way as in

Extra words above, or maybe some are missing...

> panel-dpi.c
> This ensures the backlight is also disabled when the display is
> turned off like when doing xset dpms force off.
> 
> Signed-off-by: Andreas Kemnade <andreas@xxxxxxxxxxxx>
> ---
>  .../gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c    | 18 +++++++++++++++---
>  1 file changed, 15 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c
> index 7ddc8c574a61..f326ba9dcf62 100644
> --- a/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c
> +++ b/drivers/gpu/drm/omapdrm/displays/panel-tpo-td028ttec1.c
> @@ -35,6 +35,8 @@ struct panel_drv_data {
>  
>  	struct videomode vm;
>  
> +	struct backlight_device *backlight;
> +
>  	struct spi_device *spi_dev;
>  };
>  
> @@ -268,6 +270,8 @@ static int td028ttec1_panel_enable(struct omap_dss_device *dssdev)
>  
>  	r |= jbt_ret_write_0(ddata, JBT_REG_DISPLAY_ON);
>  
> +	backlight_enable(ddata->backlight);
> +
>  	dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
>  
>  transfer_err:
> @@ -283,6 +287,8 @@ static void td028ttec1_panel_disable(struct omap_dss_device *dssdev)
>  	if (!omapdss_device_is_enabled(dssdev))
>  		return;
>  
> +	backlight_disable(ddata->backlight);
> +
>  	dev_dbg(dssdev->dev, "td028ttec1_panel_disable()\n");
>  
>  	jbt_ret_write_0(ddata, JBT_REG_DISPLAY_OFF);
> @@ -321,6 +327,15 @@ static int td028ttec1_panel_probe(struct spi_device *spi)
>  
>  	dev_dbg(&spi->dev, "%s\n", __func__);
>  
> +	ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
> +	if (ddata == NULL)
> +		return -ENOMEM;
> +
> +	ddata->backlight = devm_of_find_backlight(&spi->dev);
> +
> +	if (IS_ERR(ddata->backlight))
> +		return PTR_ERR(ddata->backlight);
> +

Is there a reason for moving the ddata alloc here, instead of keeping it
where it was?

>  	spi->bits_per_word = 9;
>  	spi->mode = SPI_MODE_3;
>  
> @@ -330,9 +345,6 @@ static int td028ttec1_panel_probe(struct spi_device *spi)
>  		return r;
>  	}
>  
> -	ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
> -	if (ddata == NULL)
> -		return -ENOMEM;
>  

This leaves an extra empty line here.

>  	dev_set_drvdata(&spi->dev, ddata);
>  

 Tomi

-- 
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux